Acid Penetration Tester
Все товары поставщика
Acid Penetration Tester - Textile and Apparel - standard
Standards:
GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chemicals-determination of resistance of protective clothing materials to permeation by liquids and gases. BS EN 463-1995 Protective clothing-protection against liquid chemicals- Test method determination of resistance to penetration by a jet of liquid (Jet test) BS EN 468-1995 Protective clothing– protection against liquid chemicals, performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing( type 4 equipment)
Applications:
Acid penetration tester is used for water proof air permeability testing of high density fabric, laminated fabric, and coating material etc. Such as canvas, such as canvas, felt, tarpaulin , cover cloth, airtight fabric, outdoor sports material, umbrella testing and waterproof material testing etc. It can be also used for testing liquid and blood permeability testing of medical protective clothing, and chemical material liquid permeability testing of chemical protective clothing, liquid permeability testing of non-woven, filter material, it can be also used for water permeability testing of paper and card board .
Product Information:
Introduction
Acid penetration tester is mainly used for measuring the penetration time of acid and alkali proof chemical fabrics.
Features
Technical Parameters
| Item | Parameters |
| Specimen size | 100mm*100mm |
| Solution | 0.1mL（conductive method）or 10mm height（indicator method )self provide 50mL beaker |
| Testing condition | Temperature：17-30℃，Relative humidity:（65±2）%RH |
| Timing | 0-99.99s |
| Accuracy | ±0.01s |
| Max acid pressure | Above 150mm H2SO4（80%） |
| Acid pressure rise rate | 60±0.5cm H2SO4/min |
| Measuring range | 0-150mm H2SO4（80%） |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fully Automatic Closed Mouth Flash Point Tester | Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab... |
 |
Medical needle toughness tester | Medical needle toughness tester - Other test instrument - standard Product Information: Medical needle injection needle toughness tester using 5.... |
 |
Laminoplasty Plate System Fatigue Testing Machine | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Define... |
 |
Conveyor needle detector | It is applicable to detect broken needle and iron matters inmany industries such as garment, textile, shoes and hats,home textiles, quilting etc. ... |
 |
Falling ball impact testing machine | Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other materials and coatings. Perf... |
Похожие товары
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Продавец: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
