Reciprocating Wear Tester

• 

Standards

ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.

Research

Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.

Applications

Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.

Aerospace Field

Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.

Automotive Manufacturing Industry

Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.

Applications in Other Industries

In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.

Technical Parameters

The biggest test (kN) : 10

Test force measuring range: the maximum test force of 0.06% 100%

Test force relative error value: plus or minus 1%, under 400 n + / - 5 n

Test force long stay: of error of plus or minus 1% FN (per)

The friction measurement range (N) : 0-300

Single-stage infinitely variable speed system (r/min) : 200 ~ 3000

Spindle speed error (r/min) : 10 mm

The friction load sensor (N) : 50

The oil box of stroke (mm) : > 45

The spindle hole taper: 1:7

The heater temperature scope of work (℃) : at room temperature to 220

The temperature control range (℃) : 2 or less

Special standard ball diameter (12.7 mm:) phi

The spindle motor power (kW) : 2.2

Machine spindle control: time control speed (cycle) friction control

Machine appearance size (mm) : 1200 * 810 * 810

Testing machine quality (kg) : 850

Другие товары поставщика

	Flame Spread Calorimeter	The Flame Spread Calorimeter is suitable for: Building materials: Evaluate flame spread and heat release performance of walls, doors, windows, cei...
	Wyzenbeek or Oscillatory Abrasion Tester	Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of fabrics against standard...
	Universal Wear Tester(UWT)/Stoll Quartermaster	Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industrials. Supplied w...
	Oil mist separation efficiency test bench| Testing Equipment	Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual con...
	Stoll Quartermaster	Standards: ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01 Applications: The Stoll Quartermaster can condu...

Похожие товары

	Falling Sand Abrasion Test machine	Продавец: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
	Conveyor Belt Drum Friction Testing Machine	Продавец: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
	Dry Sand Rubber Wheel Wear Tester	Продавец: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
	Sliding Bearing Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...
	High temperature vacum friction & wear tester	Продавец: Standard International Group (HK) Limited	The working principle of a high-temperature vacuum friction and wear testing machine is to simula...