In-situ expansion analysis system

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and related materials during charge/discharge, storage, and abuse testing. The system enables real-time, non-destructive monitoring of cell expansion behavior under controlled temperature, pressure, and environmental conditions. It is widely used in lithium-ion, solid-state battery R&D, safety evaluation, and reliability testing.

Application

(1) In-situ expansion and swelling analysis of lithium-ion pouch, prismatic, and coin cells during charge/discharge cycles.

(2) Dimensional change monitoring of solid-state batteries and solid electrolytes under electrochemical loading.

(3) Thermal expansion and contraction testing under wide temperature ranges for battery reliability studies.

(4) Pressure-coupled expansion analysis for pouch cell fatigue and mechanical stability evaluation.

(5) Correlation analysis between expansion, voltage, cycle life, and degradation mechanisms.

(6) Abuse and reliability testing including overcharge, fast charging, and thermal stress conditions.

Standards

(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.

(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test.

(3) IEC 62660-2 – Secondary lithium-ion cells for propulsion of electric road vehicles – Reliability and abuse testing.

(4) DIN 51221 – Testing of adhesives – Determination of tensile shear strength (dimensional deformation reference).

(5) CE Certification – Conformité Européenne.

Features

(1) Sub-micron displacement resolution down to 0.01 μm for precise expansion measurement.

(2) Non-contact laser displacement sensors eliminate mechanical interference and measurement hysteresis.

(3) Multi-environment testing with integrated temperature chamber covering –40°C to 200°C.

(4) Dynamic pressure loading up to 50 bar for pouch cell fatigue and mechanical stress testing.

(5) Real-time 3D deformation imaging with structured light scanning technology.

(6) AI-assisted deformation analysis for quantification of anisotropic and localized swelling.

(7) Multi-channel architecture supporting up to 8 cells tested simultaneously.

(8) Automatic test sequencing with preloaded protocols for common battery test scenarios.

(9) Open data interface for synchronization with EIS, gas analysis, and thermal imaging systems.

Parameters

Parameter	Specification
Displacement Range	±500 μm (linear), ±1° (angular)
Measurement Accuracy	±0.1 μm (linear), ±0.01° (angular)
Resolution	0.01 μm
Temperature Range	–40°C to 200°C
Temperature Ramp Rate	Up to 1°C/min
Pressure Range	0–50 bar (dynamic loading)
Channel Capacity	Up to 8 channels
Data Acquisition Rate	10,000 points/s per channel
Power Supply	100–240 V AC, 50/60 Hz
Dimensions (W×D×H)	800 × 600 × 1200 mm
Weight	220 kg (net) / 280 kg (gross)

Accessories

(1) Non-magnetic sample holders for coin cells, pouch cells, and prismatic cells.

(2) Disposable strain gauges (optional auxiliary measurement).

(3) Laser displacement sensor calibration standards (NIST-traceable).

(4) Integrated temperature and pressure control modules.

(5) Data acquisition and analysis software package.

(6) Inert gas purification cartridge and environmental monitoring sensors.

(7) User manual and maintenance documentation.

Test Procedures

(1) Install the test cell into the appropriate sample holder and align using the laser positioning system.

(2) Configure test parameters including temperature profile, pressure loading, channel selection, and data acquisition rate.

(3) Connect the system to external electrochemical testers if synchronized testing is required.

(4) Start the test sequence; the system records displacement, temperature, pressure, and auxiliary signals in real time.

(5) Monitor expansion behavior during testing and export data for further analysis and reporting.

Maintenance Information

(1) Regularly inspect laser sensors, optical components, and mechanical fixtures for contamination or misalignment.

(2) Perform periodic calibration using certified displacement standards.

(3) Check temperature chamber seals, pressure components, and safety interlocks routinely.

(4) Keep optical windows and sensor surfaces clean to maintain measurement accuracy.

(5) Update software and back up data according to laboratory quality management requirements.

Другие товары поставщика

	Textile Abrasion-Resistant Printed Fabric Surface Wear Pattern Tool	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Textile Flatness Tester is ideal for industries and scenarios including: ...
	Infusion Pump Flow Rate Tester ISO & FDA Standard	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Pump Flow Rate Tester is specifically designed for testing the f...
	Guidewires Tip Flexibility Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Guidewires Tip Flexibility Tester is designed and manufactured in accordance with the r...
	BBA-Grade Desktop & Vertical Solar Simulator Manufacturer | IEC 60904-9 PV Module Testing	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60904-9 – Photovoltaic Devices: Requirements for Sol...
	Carpet Wear and Load Resistance Tester ASTM D3936 Industrial Supply	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Accurately simulates walking pressures and shearing effects on carp...

Все товары поставщика

Похожие товары

	Battery Diaphragm Gas Permeability Tester ISO	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea...
	Torsion Testing Tester ASTM, JIS, and DIN	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma...
	Wire Torsion and Winding Tester ASTM and JIS	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes...
	Metal Wire Repeated Bending Tester ISO/DIS 7801	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ...
	Metal Wire Wrap Tester ISO 4101	Продавец: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de...