SemiAutomatic Tabletop Medical Autoclave
Semi Automatic Tabletop medical Autoclave WR-16B-A-(-P with printer)Prompt1. Please place the sterilization on a plane place ,Website:, which could adjust the height by adjusting foot pad2. Please adopt distilled water to extend the service life3. Don't block the heat removal system on the surface of sterilization4. Please put the instruments on the tray not touching one another allowing space for steam to pass through5. Please empty the used water tank frequently. Usually it need empty when the clean water in the reservoir is empty.6. Please ensure the door handle is closed tightly7. Never try to open the chamber door if and when the pressure display doesn't show "0.0"8. Please cut off the power and cool down the autoclave before maintenance9. Don't drag the machine while moving10.Power connection must be grounded properly11.Must be provided enough power. (23L:2300VA/18L:1800VA)12.While the outside temperature is too low, please pre-heating the machine without instruments for 30 minutes before sterilize
Другие товары поставщика
|
|
EN13060 Class B autoclaving equipment tattoo autoclave sterilization machineWR-MFull stainless steel chamber,Website:, anti-corrosion and anti-pres... |
|
|
Hospital Health care Steam Veterinary autoclaveWR-16B-M-PEuropean B standard with 3-time vacuum and drying.Residual humidity is less than 0.2% vacu... |
|
|
Speed moist heat sterilizer dental autoclaveWR-18B-B(-P with printer)
Voltage AC 220V±10%
Frequency 50/60 HZ
Wire plug GB 3 cores/EN... |
|
|
Semi Automatic Tabletop medical Autoclave WR-16B-A-(-P with printer)Prompt1. Please place the sterilization on a plane place ,Website:, which could... |
|
|
VORY Sterilization bag sealing machineTechnical Specifications Voltage220V/50HzPower500WFuse tube3TAEmbossing width10mmG.W8.5KgPackage size460x380x... |
Все товары поставщика
Похожие товары