Automatic Cappuccino Machine for Home Use

EDI is a pure water manufacturing technology that combines ion exchange technology, ion exchange membrane technology and ion electromigration technology. It skillfully combines electrodialysis and ion exchange technology, uses high voltage of electrodes at both ends to move charged ions in water, and cooperates with ion exchange resin and selective resin membrane to accelerate the removal of ions, so as to achieve the purpose of water purification. During EDI desalination, ions are removed by ion exchange membrane under the action of electric field. At the same time, water molecules generate hydrogen ions and hydroxide ions under the action of electric field, which continuously regenerate the ion exchange resin to keep the ion exchange resin in the best state.

Technical Data of ElectrodeionizationUnit

Item	Reference value
Nominal Recovery:	90–95%
EDI Water Quality:	15–18 MΩ.CM（25℃）
FEED CONDUCTIVITY (INCLUDING CO2):	< 10 µs/cm（25℃）
Operating Temperature:	50–100° F
Maximum Inlet Pressure:	100 psig
Minimum Inlet Pressure:	60 psig
Expected Pressure Drop:	30–40 psig
Electrical Requirement:	380 VAC, 3-phase, 50 Hz.

OPERATING PRINCIPLES OF ELECTRODEIONIZATION

EDI Process

EDI desalination process is to exchange ions in water with hydroxide ions or hydrogen ions in ion exchange resin, and then migrate these ions into concentrated water；

The above exchange reaction takes place in the freshwater chamber of the module. In the freshwater chamber, the hydroxide ion in the anion exchange resin exchanges with the anion in the water, and the hydrogen ion in the cation exchange resin exchanges with the cation in the water；

The exchanged ions migrate along the surface of the resin ball under the effect of the DC electric field and enter the concentrated water chamber through the ion exchange membrane；

The negatively charged anions are attracted by the anode, and these ions enter the adjacent concentrated water chamber through the anion membrane, while the adjacent cation membrane membrane does not allow them to pass through. These ions are blocked in the concentrated water, while the positively charged cations are attracted by the anion anion, and these ions enter the adjacent concentrated water chamber through the cation membrane, while the adjacent anion membrane does not allow them to pass through. These ions are blocked in the concentrated water.

In concentrated water, ions from both directions maintain electric neutrality. At the same time, the amount of current is proportional to the amount of ion migration. The amount of current consists of two parts, one part from the migration of removed ions, and the other part from the migration of water itself ionized into H+and OH - ions；

When the water flow passes through the fresh water chamber and the concentrated water chamber, the ions gradually enter the adjacent concentrated water chamber from the fresh water chamber and are carried out of the EDI module by the concentrated water；

Under the action of higher voltage gradient, water will generate a large amount of H+and OH- through electrolysis. These generated H+and OH- will continuously regenerate the ion exchange resin. Therefore, the ion exchange resin in EDI module does not need chemical regeneration；

The above is the desalination process of EDI.

FEATURES OF ELECTRODEIONIZATION

Regeneration of acid and alkali is not needed.

Zero discharge; no discharge of wastewater.

The running is continuous and the water quality is stable.

Modularization design is adopted so as to facilitate extension.

Less space is occupied.

If you want to know more kinds of electrodeionization system, please visit our website.

The water system in pharmais based on the preparation equipment, storage and export of purified water and water for injection and other functional units, optimized and combined by various functional modules, so as to ensure the high performance and quality of the whole system, and make the product water fully meet or exceed the water quality standards of purified water and water for injection.

Другие товары поставщика

	Pure Steam Generation System(PS/CS)	Pure steam generator is one of the important equipment used in tank equipment, pipeline system and filter sterilization, and can also be used to dr...
	Pure Steam Generation System(PS/CS)	Pure steam generator is one of the important equipment used in tank equipment, pipeline system and filter sterilization, and can also be used to dr...
	RO PLANT WITH EDI	The combination of reverse osmosis and EDI has overcome the deficiency that reverse osmosis effluent cannot be deeply desalted, and further removed...
	PHARMACEUTICAL REVERSE OSMOSIS SYSTEM	With RO membrane separation technology as the core, it adopts automatic control, integrated design, modular installation, low energy consumption an...
	PW/WFI SKID	PW/WFI SKID The purified water/water for injection(WFI) combined distribution system is a kind of equipment integration device, which can fully co...

Все товары поставщика

Похожие товары

	PHARMACEUTICAL REVERSE OSMOSIS SYSTEM	Продавец: Nanjing Biocell Environmental Technology Co., Ltd	PHARMACEUTICAL REVERSE OSMOSIS SYSTEM With RO membrane separation technology as the core, the re...
	SANITARY HEAT EXCHANGER	Продавец: Nanjing Biocell Environmental Technology Co., Ltd	SANITARY HEAT EXCHANGER The wfi sanitary heat exchanger(sterile double tube plate heat exchanger...
	CLEAN STEAM GENERATOR	Продавец: Nanjing Biocell Environmental Technology Co., Ltd	CLEAN STEAM GENERATORS The prototype of the clean steam generatorfor humidification is a pure st...
	PURE STEAM GENERATOR	Продавец: Nanjing Biocell Environmental Technology Co., Ltd	PURE STEAM GENERATORS A pure steam generatoris one of the important equipment used for tank equi...
	EDI PLANT WATER TREATMENT	Продавец: Nanjing Biocell Environmental Technology Co., Ltd	EDI PLANT WATER TREATMENT EDI plant water treatmentmodule is usually placed behind the reverse o...