ECT For Automotive And Aerosapce

• 

Eddy current testing technology has been widely used in the detection of metal components in the automotive and aerospace industry. In order to ensure the flight safety of the aircraft, the relevant components must be periodically inspected. The eddy current technology is usually used to detect aero-engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the aircraft, landing gear, wheels and aluminum skin as the aircraft non destructive testing. And subsurface defects, and used to detect defects in the wing joint weld. In the detection, it can effectively suppress the shaking of the probe, and the material is uneven and cause interference signals. Metal magnetic memory testing technology can be used to diagnose the stress concentration of the above components or early damage.

Due to the complex geometry of the auto parts, the equipment is required to have a high level of materials and complicated materials, requiring diverse equipment and high precision. In addition, the production of auto parts is a large industrial production, with certain beat monitoring requirements, and only by reducing the testing costs, can we reduce the automobile production and improve the competitiveness in the domestic and foreign markets. With the development of the national economy, the automobile industry has become a pillar industry in China. Therefore, non-destructive testing technology for eddy current flaw detectors for automotive parts is also receiving increasing attention from manufacturers and researchers. At present, the most widely used non destructive testing machine in the detection of automotive parts is the eddy current flaw detector ultrasonic testing method. In the ultrasonic flaw detection of eddy current flaw detectors at home and abroad, the most used type A ultrasonic flaw detector. It adopts A-type ultrasonic display, which has the advantages of simple and cheap equipment, can locate and quantify defects, and is widely used in production inspection.

However, its flaw detection results are not intuitive, no record, difficult to detect, and many human factors. Seriously affect the reliability of detection. Due to the continuous development of computer technology and electronic devices, the digital acquisition and analysis of the ultrasonic signal of the eddy current flaw detector become possible, the waveform can be recorded and preserved, and the ultrasonic detection of the eddy current flaw detector is positive digital signal processing and imaging direction development. Super-generation image technology is a remarkable new technology. The ultrasonic image of the object can provide intuitively and a large amount of information, directly reflecting the acoustic and mechanical properties of the object, and can also evaluate the mechanical properties of the microstructure of the solid material. Suddenly macroscopic discontinuities. In short, the aviation ndt services for automotive parts eddy current flaw detector will develop with the advancement of modern high-tech, to the direction of intelligence, automation and imaging, in order to adapt to the rapid development of modern automobile manufacturing industrial parts quality inspection, testing requirements.

Другие товары поставщика

	Eddy Current Testing Equipment	Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects...
	Connecting rod hardness eddy current sorting machine LGYDFX-01	The connecting rod hardness eddy current sorting machinehas a calibration device, input compensation parameters, automatic/manual temperature compe...
	MFL101 Tank Floor MFL Scanner	Technical Characteristics ofMFL101 Tank Floor MFL Scanner Unique full modular structure, from the main body of the computer mechanism the handle o...
	QTXET-01 Ball Studs Eddy Current Sorting Machine	There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemi...
	Benchtop Magnetic Flux Leakage Testing Equipment	MFI Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to def...

Похожие товары

	Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
	Solid Walk In Test Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
	Compact Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
	Drying Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
	Walk In Test Chamber For CATL Battery	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...