Bolt Vortex Sorter BKNFX-11

• 

Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

BKNFX-11 bolt eddy current sorter is suitable for high-strength bolt heat treatment state, crack, wrong thread anchor, and mixture sorting.

The shape of bolt:

Generally, the countersunk head is used where the surface is smooth and does not protrude after the connection is required because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rods, which can not loosen the bolt when it is vibrated. Some bolts without threads are to be thin, called thin waist bolts. This type of bolt facilitates the coupling of the force. There are special high-strength bolts on the steel structure, the head will be larger and the size will change.

In addition, there are special uses: T-slot bolts, the most used on ndt machine tool fixtures, special shape, cut off both sides of the head. Anchor bolts for machine and floor attachments are available in a wide variety of shapes. U-bolts, as mentioned above. and many more. There is also a special stud for welding. One end has a thread and one end is not welded. It can be welded to the part and the other side can be directly screwed.

Bolt Vortex Sorter BKNFX-11 Brief

Sorting accuracy

Другие товары поставщика

	Magnetic Flux Leakage Testing Equipment	Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond...
	MFL-7389 Tube Magnetic Flux Leakage Detector	Tubing repair is an important measure to reduce the comprehensive cost of production in oil production plants to improve the quality of repairing t...
	BKNET-0102 Welded Pipe Eddy Current Flaw Detector	Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle...
	Eddy Current Testing Equipment	Automatic EDM Notchis the ideal equipment for processing artificial defects of pipe rod standards in non-destructive testing work. The flaw detecto...
	BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator	Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...

Похожие товары

	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Продавец: China PHONEFIX Technology Co., Ltd	Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...
	Высокоточный датчик напряжения HCV1500	Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd	Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...