Ozone Resistance Test Chamber

• 

Standards:
GB/T2423.24-95 Environmental Testing of Electronic and Electrical Products Part 2: Test Methods, Test SQ: Simulated Solar Radiation on the Ground
ASTM D1149 Test Method for Ozone Cracking of Rubber in a Controlled Environment
ISO 1431 Test method for resistance to ozone cracking of vulcanized or thermoplastic rubber
ASTM D1171 Standard Test Method for Rubber Aging - Ozone Surface Cracking in Outdoor or Test Chamber (Triangular Specimen)If you need more models about our test equipment, please reference our chamber-testing（.）com

Description and application
Ozone aging test chamber simulates and enhances the status of ozone in the atmosphere, studies the effect of ozone on rubber, and then identifies and evaluates the methods of rubber resistance to ozone and aging, takes effective anti-aging measures, and improves the service life of rubber products.JOEO ozone resistance test chamber is mainly used for ozone aging resistance test of polymer materials and products (rubber). Mainly used in rubber and plastic; Automobile production; Wire and cable; Packaging materials; Instruments and meters; Medical equipment; Civil nuclear energy; Civil aviation; Colleges and universities; Research laboratories; Inspection arbitration, technical supervision departments and other rubber products.

Structure:
Usually, there is only one door in the secret room, and the door on the left is open. It can also be made into a double door (customized).
There is a 50mm diameter test hole on the left side of the test box, equipped with a silicone rubber plug, which can be used for external testing of power or signal wires.
There is a hollow heated anti frost observation window on the door, which is resistant to high and low temperatures and is not affected by fog. It has LED lights that turn on when in use and off when not in use. The conventional observation window size is W400 * H300mm. There are silicone rubber sealing strips on the door, which are resistant to high and low temperatures, anti-aging, and have good sealing performance. To prevent condensation or frost on the door frame and edge during low-temperature testing, an electric heating defrosting device is installed on the door frame and edge. The door handle adopts a non reaction handle, with one hand opening the door, making it easy to operate, safe and reliable.
The inner and outer chambers of the JOEO ozone test chamber are made of SUS304 and spray coated steel plates, respectively. The inner box has buckles and multi-layer sample racks (please consult sales for specific quantities), all made of 304 material. The outer cavity is treated with sheet metal spraying, with beautiful color and corrosion resistance.
The equipment outlet is located below the rear. After connecting the water pipe, the water can be directly discharged into the sewer without pollution.
The control panel is located on the upper left side of the test box, and the conventional control is the PID touch screen. Humanized operation, English operating system, customizable in other languages, confirmation required before placing an order.
The sound and light alarm system is located above the control panel and has three colors: yellow (standby), red (alarm), and green (running). When the device is in different states, the corresponding indicator light will remain on.

Features:
JOEO Ozone test chamber equipment produces ozone gas by a quiet and efficient ozone generator, and after a certain amount of air is treated, the switch enters the test chamber in the mixture, the continuous online ultraviolet detector detects the ozone concentration, the ozone generator control feedback to the system, the control system effectively controls the occurrence of ozone according to the set value, so that the ozone chamber maintains the appropriate working concentration.All test conditions are satisfied through the heating and humidifying system.

Другие товары поставщика

	Salt Mist Test Chamber(Salt /Temperature /Humidity)	申请 该复合循环腐蚀试验室可进行传统的盐喷、干湿交替混合盐喷试验以及大多数汽车循环腐蚀试验。它是专门设计和装配的,以满足控制标准的要求,控制盐喷,相对湿度,空气干燥,凝结湿度,自动喷洒,盐水浸没,旋转喷洒,和低温。盐喷雾柜用于测试涂料涂装件、金属组件、电子组件、光电涂装件等。如果您需要更多...
	Horizontal Thermal Test Chamber	Application JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom ...
	three Axis Vibration Test System	Application JOEO multi axis vibration test system can simulate various vibration modes, including sine wave, dynamic vibration, shock vibration, se...
	Temperature Humidity And Vibration Test Chamber	Application Temperature humidity and vibration test chamber conforms to the national standard and meets the specific test requirements.Through the ...
	High Temperature Muffle Furnace	Application Analytical Chemistry: muffle furnace can be used for sample pretreatment in analytical chemistry, such as ashing, combustion, and ther...

Похожие товары

	Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
	Solid Walk In Test Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
	Compact Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
	Drying Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
	Walk In Test Chamber For CATL Battery	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...