Rubbing Color Fastness Tester
Introduction
Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of color transfer to the small white cloth with gray scale. The tester is equipped with crank arm, counter, stainless steel sample holder, 16mm or 25mm diameter test head (providing 9N + 10% vertical pressure).
Standards
BS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8A
Application
This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing.
Другие товары поставщика
|
|
Safety Helmet Roll-off device |
Purpose
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
|
|
Friction and wear meter |
Standards
ASTM G99-04
ASTM G77-16
ISO 9352:1995
GB/T 12444-2006
GB/T 12607-2007
GB/T 1865-2009
Application field
Petrochemical: Used to ass... |
|
|
Coatings Shear Fatigue Tester |
Standard
YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
|
|
Direcct flame impingement Tester with BS 476-12 |
Introduction:
The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu... |
|
|
Electric Wire and Cable Smoke Density Tester |
Product details
Electric wire and cable smoke density tester complies withGB/T17651.1~2-1998.IEC61034-1~2:1997“Measurement of smoke density ... |
Все товары поставщика
Похожие товары
