.

Sulfur Dioxide and Hydrogen Sulfide Corrosion Test Chamber for Automotive Connectors

Meeting Standards:

Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89, GB2423.9 - 93, GJB150, QC/T417.1 - 2001 and equivalent standards such as IEC, DIN, MIL, ASTM.

Technical Parameters:

1. Temperature range: 10 - 55°C 2. Temperature fluctuation: ±0.5°C 3. Temperature uniformity: ±2°C 4. Sulfur dioxide gas concentration: 100ppb - 50000ppb (0.1ppm - 50ppm) 5. Hydrogen sulfide gas concentration: 10ppb - 5000ppb (0.01ppm - 5ppm) 6. Relative humidity: 75±3% 7. Tests with sulfur dioxide, hydrogen sulfide, and mixed gases of sulfur dioxide and hydrogen sulfide can be conducted.

Environmental Requirements:

1. Power supply: AC380V 3Φ 10KVA 0HZ 2. Allowable voltage range: ±5% of the rated value 3. Maximum load: 6KVA 4. The distance between the chamber and the wall should be greater than 600cm.

Structural Materials and Features:

1. The chamber is molded from epoxy fiberglass. Asbestos board is pasted inside the jacket. It is resistant to high temperature and corrosion, lightweight, and has high strength. Both the inner and outer walls of the chamber are smooth and easy to clean. 2. The chamber cover is made of epoxy fiberglass with a top cover temperature of 100 - 200°C to prevent condensed water in the chamber from dripping directly onto the test specimens. 3. Heater: The nickel - chromium alloy heating wire heats from the bottom, forming jacket heating to ensure good temperature uniformity inside the chamber. 4. Humidification method: Humidification by a steam generator. 5. Input methods for sulfur dioxide and hydrogen sulfide: Input from cylinders, and both input and discharge are quantitatively controlled by concentration sensors. 6. Exhaust gas treatment: Install treatment devices for sulfur dioxide and hydrogen sulfide gases. After multi - stage treatment with sodium bicarbonate, the exhaust gas meets the discharge standards (the purification device is external).

Control System:

1. Temperature control: Japanese Fuji temperature controller 2. Temperature input: PT100; Output: Driven by SSR 3. Display range: 0 - 100°C 4. Control range: RT + 5 - 55°C 5. Cycle used (measurement filtering): 2 - 3s 6. The main control components are products from joint - venture companies. 7. The temperature is controlled by a solid - state relay, with stable performance and no noise. 8. A fan is used for stirring and circulation inside the chamber. 9. Display and control of sulfur dioxide concentration


Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Geosynthetics thickness tester
Geosynthetics thickness tester Scope of application: Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on...
Accelerating Decomposition Temperature Tester
Accelerating Decomposition Temperature Tester This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H.2: Insulated Storage ...
Carpet tuft length measuring instrument
Carpet tuft length measuring instrument Standard BS 4223:1989 (British Standard): Specifies methods for determining the pile length of cut-pile carpets, ensuring consistency in quality...
Carpet Dimensional Stability Tester
Carpet Dimensional Stability Tester Standard ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability) ISO 2551(Textile Floor Coverings - Determination of Dimens...
Fiber ratio resistance tester
Fiber ratio resistance tester Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp...
Все товары поставщика

Похожие товары

Reliable Components for Water and Industrial Systems
Reliable Components for Water and Industrial Systems Продавец: 866507 The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
Double Convex Lenses
Double Convex Lenses Продавец: Shandong Yanggu Constant Crystal Optics, Inc Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
Wedge Prism
Wedge Prism Продавец: Shandong Yanggu Constant Crystal Optics, Inc Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
Ball Lenses
Ball Lenses Продавец: Shandong Yanggu Constant Crystal Optics, Inc Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery
KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Продавец: Xin Tang Shallow Power Supply Co.,LTD KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...