Car seat components strength test bench

• 

Applicable standards:

The National Standard of the People's Republic of China （GB） : such asGB 15083, this standard specifies the strength requirements and test methods of the car seat system, which is applicable to the seats and their fixtures of M and N cars.

Federal Motor Vehicle Safety Standard （FMVSS） : such asFMVSS 207, this standard specifies the strength requirements of the seat back and its adjustment device and applies to all seats in Class M1 vehicles.

Economic Commission for Europe Regulation （ECE R） : such asECE R17, this regulation regulates the strength of car seats, seat belt anchors, etc.

Main parameters:

Loading capacity:The test bench should have sufficient loading capacity to simulate the various loads that the seat may withstand in actual use. For example, for a 20g static loading test, the test bench needs to be able to apply a force equivalent to 20 times the gravity of the seat assembly.

Loading method:The test bench should support a variety of loading methods, such as horizontal forward, horizontal backward, torsion, etc., to meet the needs of different test projects.

Test accuracy:The loading accuracy and measurement accuracy of the test bench should meet the requirements of the relevant standards to ensure the accuracy and reliability of the test results.

Number of tests:The test bench should have the function of setting and recording the number of tests for durability testing.

Control mode:The test bench is usually controlled by computer servo to achieve accurate loading and measurement.

Data acquisition and processing:The test bench should be equipped with a data acquisition system, which can automatically record various data during the test process and generate test reports.

Другие товары поставщика

	Burning Behaviour of Bunched Cables EN 50399	This Tester is designed accordance with the relevant provisions of UL1685.GB18380.3 standard about wire and cable burning test requirements. And me...
	Multilayer geotextile single-layer thickness tester	Scope of application: The multi-layer sample is mechanically separated and the thickness of each single layer of the sample is measured under the ...
	Metal Bone Screws Self - tapping Tester	Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metal...
	Battery impact tester	The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position over the center of the ...
	Contact lens oxygen permeability measuring machine	Product Introduction: Contact lens oxygen permeability measuring instrument (polarography) is designed for soft and hard contact lenses (contact l...

Похожие товары

	Reliable Components for Water and Industrial Systems	Продавец: 866507	The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...
	Double Convex Lenses	Продавец: Shandong Yanggu Constant Crystal Optics, Inc	Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
	Wedge Prism	Продавец: Shandong Yanggu Constant Crystal Optics, Inc	Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
	Ball Lenses	Продавец: Shandong Yanggu Constant Crystal Optics, Inc	Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery	Продавец: Xin Tang Shallow Power Supply Co.,LTD	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...