Digital Fabric Elmendorf Tearing Strength Tester
Tearing Tester Further Details: The Tearing Strength of fabrics, Paper, Plastic Film, or other comparable materials in sheet structure is controlled by estimation of work done in tearing through a settled length of the test example utilizing the elemendorf tear analyzer. The Elmendorf Tear Tester comprises of a metal part pendulum turned on hostile to contact metal spheres more than a vertical section altered on an unbending metallic base. The test example, fit as a fiddle fitted in between two clips is mounted on a pendulum and the other is mounted on the vertical section. The clasps are mounted in a way to give a holding look are adjusted to one another when pendulum is discharged by lifting a discharge lever the activity cause the pendulum to tumble down under its weight & to tear the test example at the same time. The vitality retained amid tearing is demonstrated on a scale fitted on pendulum by a low rubbing pointer turned on the hub of the pendulum. A movable blade is additionally mounted on the pendulum upper section is focused between the two braces & is utilized for making the starting opening in the test example. A check weight is supplied with the analyzer for confirmation of the scale.A fine metallic paint is smeared over it, in addition to it an excellent chrome plating to give it an corrosion safe completion. Cardboard Tearing Strength Tester Specifications: A. Microprocessor control; B. According to materials of different thickness, such as fabric, plastic, cardboard, etc., using pendulums with different weight; C. Equipped with safety bolt, pendulums installed tools and safety protection device for safety. D. Optional various measurement units: MN, CN, N, G, KG, OZ, LB; E. The cutting blade with hardening coating, more sharp and durable; F. Unique calibration system, guarantee the accuracy of the test for the most. Electronic Tearing Strength Tester Standards： GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 GB/T455 QB/T 1050 JIS P8116 TAPPI T414
Другие товары поставщика
|
|
Carpet Dimensional Stability Tester |
Standard
ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability)
ISO 2551(Textile Floor Coverings - Determination of Dimens... |
|
|
Paper thickness tester |
Product Introduction:
Paper thickness tester is suitable for measuring the thickness of various paper （including toilet paper）， cardboard, corruga... |
|
|
Hydrogen Sulfide Corrosion Test Chamber |
Referenced Standards:
Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid... |
|
|
Electrochemical Corrosion and Wear Testing Machine |
Standard
ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body f... |
|
|
Surgical Mask Flame Retardant Tester |
Standards:
GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier
YY 0469... |
Все товары поставщика
Похожие товары
