Luminous Afterglow Performance Tester
Luminous Afterglow Performance Tester
The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of various textiles. Fibers, yarns, and powders can all be tested.
Testing Principle
Use the specified light source as the excitation light source. Under the specified illuminance conditions, directly irradiate the sample. After the sample is excited to saturation, remove the excitation light source, and measure the afterglow brightness and decay time on the sample surface through a brightness meter.
Instrument Features
- Automatically record the brightness value within the set time through software. Fully automatic measurement, simple operation, capable of long-time measurement, and automatically save data.
- Multiple light-shielding designs in the fully enclosed test chamber reduce the influence of external light sources on test results.
- Automatically switch test samples. One set of samples can be tested at a time for 3 groups.
- Specially made imported sensors with fast sampling speed and high accuracy.
- Wide testing range, covering powders, fibers, yarns, fabrics, etc.
Applicable Standards
GB/T 43716 - 2024 Textiles - Test Method for Luminous Afterglow Performance - Photometer Method
Technical Parameters
- Excitation light source: Fluorescent lamp, color temperature (6500 ± 500) K
- Brightness meter: 0 - 10000 mcd/m², resolution: 0.01 mcd/cm², accuracy: ±5%
- Illuminometer: 0 - 10000 lx, resolution: 0.1 lx, accuracy: ±4%
- Approximate weight of the whole machine: 30 kg
- Power supply: AC 220V/50Hz
- Approximate external dimensions: 375 x 500 x 598 mm (W x D x H)
Standard Configuration
- 1 main unit
- 1 Lenovo integrated computer
- 1 Lenovo laser printer
- 3 sample clamps
- 1 excitation light source
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Gas Hazardous Characteristics Tester | This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mix... |
 |
Diaper impurity testing machine | Introduction: The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irradiation. ... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Te... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
Похожие товары
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Продавец: China PHONEFIX Technology Co., Ltd | Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен... |
 |
Высокоточный датчик напряжения HCV1500 | Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd | Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
