Textile Flatness Tester
I. Product Overview
TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variation, weave irregularities, and fiber distribution. It ensures compliance with quality standards for garment manufacturing, upholstery, and industrial textiles.
- Type: Non-contact optical scanning system
- Measurement Parameters:
- Thickness variation (μm)
- Surface roughness (Ra)
- Weave flatness index (FI)
- Sample Size: Up to 1000×1000mm (adjustable)
- Applications: Knitted fabrics, woven textiles, technical textiles
II. Technical Specifications
| Parameter | Specifications |
|---|---|
| Scanning Resolution | 0.1mm x 0.1mm grid mapping |
| Thickness Measurement Range | 0.05-10mm (±0.5% accuracy) |
| Surface Roughness Detection | 0.1-100μm Ra (ISO 4287 standard) |
| Light Source | 400-700nm RGB LED array |
| Data Output | 3D topography map + statistical CSV |
| Dimensions | 1500×800×1200mm (L×W×H) |
III. Key Features
- Multi-Layer Analysis:
- Surface Layer:Detects yarn unevenness
- Mid-Layer:Measures fabric density
- Base Layer:Identifies substrate irregularities
- Advanced Features:
- AI defect classification (32+ pattern types)
- Real-time thickness deviation alerts
- Batch comparison with historical data
- Calibration System:
- NIST-traceable reference plates
- Auto-zero compensation
- Environmental drift correction
IV. Compliance Standards
- ISO 9073-4 (Textile flatness measurement)
- ASTM D3884 (Abrasion resistance correlation)
- AATCC 124 (Appearance after repeated home laundering)
- GB/T 3917.2 (Chinese fabric evenness standard)
V. Applications
- Quality Control:Pre-shipment fabric inspection
- R&D:Developing wrinkle-resistant fabrics
- Forensic Analysis:Evaluating wear patterns
- Textile Education:Training on fabric defects
Standard Operation Workflow:
- Sample Mounting: Clamp fabric on vacuum table
- Parameter Setup: Select test mode (static/dynamic)
- Scanning: Full-area 3D mapping (5-20min)
- Analysis: Generate defect density heatmaps
- Reporting: Export PDF/A4 compliance reports
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Wear Scar Profilometric Measuring Instrument | Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an... |
 |
Машина испытания силы зажима | Проект Standatd: ASTM D6055-2019, ISTA 6 Amazon, ISTA 6- SAMS CLUB, ISTA 3J ОБЩИЕ СПЕЦИФИКАЦИИ Приложения: Машина для испытания силы зажима дл... |
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
 |
Metal Corrosivity Tester | Scope of Application The metal corrosivity tester is designed and manufactured in line with the requirements stipulated in the national standard o... |
 |
Battery Adiabatic Calorimeter | Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201... |
Похожие товары
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Продавец: China PHONEFIX Technology Co., Ltd | Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен... |
 |
Высокоточный датчик напряжения HCV1500 | Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd | Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
