Battery short-circuit tester丨Battery short-circuit chamber

Product introduction

The device is designed based on a variety of battery short-circuit test standards.

According to the standard requirements, the short-circuit device must meet the

internal resistance range of 80 soil 20m, so as to obtain the maximum short-circuit

current required by the test. In addition, the circuit design of the short-circuit device

must also be able to withstand the impact of large current, so we choose industrial

grade DC electromagnetic contactors and all copper terminals and internal copper

plates to guide the flow, wide and thick copper plates effectively improve the heat

dissipation effect, make the high-current short-circuit device safer, effectively reduce

the loss of test equipment, and ensure the accuracy of the test data.

Meet the standard

GB/T31485-2015 "Safety requirements and test methods for power batteries for

electric vehicles"

GB/T31241-2022 "Safety requirements for Lithium-ion batteries and battery packs

for portable electronic products"

UN38.3 United Nations Manual of Tests and Standards for the Transport of

Dangerous Goods

IEC62133 "Safety requirements for batteries (groups) composed of cells and for

use in portable equipment"

UL1642:2012 "Lithium Battery Standard"

Technical parameter

Inner box size :400x400x400mm(width x depth x height)

Size :760x690x1720mm(width x Depth x height)

Temperature range :RT+10-150℃C

Temperature display accuracy :0.1°C

Temperature stability: 1.0*C

Temperature uniformity: 2 "C

Heating time :(5±2) "C/min

Inner box material :SUS304 stainless steel plate, thickness 1.2mm;

Outer box material: 1.5mm thick cold rolled steel plate paint treatment;

Observation window: 250x250mm tempered glass, with stainless steel mesh;

Lighting device: The machine is equipped with a light, which is convenient to

observe the state of the tested sample;

Door: single door open left, side of the door is equipped with explosion-proof

chain;

Test hole: There are 2 test holes with a diameter of 50mm on the right side of

the equipment, which is convenient to put the temperature, voltage, current and

other collection lines:

Insulation material: high efficiency compressed glass wool

Heat preservation device: no fuse switch, over temperature protection switch, fuse

Safety device: equipment equipped with overtemperature alarm;

Control formation: reach the set time to cut off the heating power supply;

Air supply circulation system: convection air supply circulation system

Control mode: touch screen control

Temperature collection range :RT-1000°C;

Temperature acquisition channel :1 channel;

Temperature acquisition accuracy: 1.5°C;

Voltage acquisition model :0-100V;

Voltage acquisition channel :1 channel;

Voltage accuracy: Earth 0.5%FS;

Current collection range :0-1000A;

Current acquisition channel :1 channel;

Current accuracy: soil 0.5%FS;

Acquisition frequency :10HZ

Internal resistance of device loop :80 20mΩ;

Port pressure port: The opening size is 200x200mm, located at the back of the box.

When the sample explodes, the pressure relief port will pop open and remove the

pressure;

Device movement: there are four universal casters at the bottom of the device,

which can move freely;

Equipment weight :170Kg;

Power supply :AC220V;

Power :3KW.

Другие товары поставщика

	IP6X Test Equipment	Features and Benefits 1.Theworkroomadopts double-layer sealing rubber, and is equipped with electromagnetic lock to prevent the operator from miso...
	Safety Helmet Impact Acceleration Tester	Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance...
	20L Spherical Explosion Tester	20L Spherical Explosion Tester is characterized by accurate test data and ease of use. Its through the compressed air will be a certain mass of dus...
	Cork Puncture and Chip Detection Instrument	The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
	Automated Freezing/Pour Point Chiller Tester	Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...

Все товары поставщика

Похожие товары

	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Продавец: China PHONEFIX Technology Co., Ltd	Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...
	Fabric Thickness Tester	Продавец: Cell Instruments Co., Ltd	Fabric Thickness Testeris used to measure the thickness of various types of textiles, such as wov...
	Mop Friction Force Tester	Продавец: Cell Instruments Co., Ltd	Mops are indispensable tools for both household and commercial cleaning, and their frictional per...
	BCT Box Compression Tester	Продавец: Cell Instruments Co., Ltd	BoxCompression testeris used for measuring the ability of packaged freights and containers, made ...
	BTT-02 Ball Tack Tester	Продавец: Cell Instruments Co., Ltd	Inclined Type Ball Tack Testeris equipped with the inclined plate of 20°, 30° or 40° ...