Resistance Tester for Protective Clothing / Protective Clothing Tester
Standards:
GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-static Performance - Test Method for Resistance Through the Material (Vertical Resistance) GB 12014 - 2009 Anti-static Clothing GB/T 12703.4 - 2010 Textiles - Evaluation of Electrostatic Properties - Part 4: Resistivity EN 1149 - 1 - 2006 Protective Clothing - Electrostatic Properties - Part 1: Surface Resistivity Test Method and Requirements EN 1149 - 2 - 1997 Protective Clothing - Electrostatic Properties - Part 2: Resistance Through the Material - Vertical Resistance Test Method AATCC 76 Fabric Surface Resistivity ANSI / ESD STM2.1 Anti-static Clothing Resistance Test Method - American Standard
Applications:
This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying with different testing standards such as national standards and European standards. It is equipped with the TEST V1.6 dedicated testing software, which can realize online operation, automatically complete the sample test according to the standard regulations, process the test results, edit and print the test reports.
Product Information:
Resistance measurement range: 104Ω ～ 1016Ω.
LCD display: Surface resistance, temperature, current, voltage, test time, and test sample data can be input; units can be switched (mm, cm, m).
Built-in test voltage: Any value from 0 - 1000V can be set.
Basic accuracy: < 1G ± 1%; >= 1G ± 3%; >= 1T ± 10%. The accuracy deviation values in different ranges are different.
Operating environment: Temperature: 0℃ ～ 40℃, relative humidity < 80%.
Internal test voltage: Any value from 10/50/100/250/500/1000V can be set.
Power supply: AC 220V, 50HZ, power consumption is about 5W.
Measurement mode: Manual/automatic range. With PC testing software (optional), USB communication interface, and the software interface synchronously displays, analyzes, saves and prints data
Common electrode (fixture) device options:
Type A: Heavy hammer electrode (for point-to-point resistance test of fabric surface)
Type B: Ring combination electrode (for fabric surface resistivity test and fabric vertical resistance test)
Dimensions of the main unit: 330mm * 340mm * 120mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Geotextile Effective Aperture Tester丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile s... |
 |
Moisture friction and wear testing machine / Friction Wear Test Machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Film punching machine ASTM | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table siz... |
 |
Shoe Bending Stiffness Tester / Shoe Outsole Bending Stiffness Tester | Applications: Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39. 42.and British shoe Size 6... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
