Shoe Insulation Tester | Thermal Performance Test
Application:
Shoes Heat Insulation Tester is used to test shoe heat insulation / thermal insulation against hot performance. Place the shoe in sandbath and the footwear shall contact with the plate(forepart and the heel) in certain temperature for a given period. Then to measure the temperature increase inside of the shoe. The contact temperature and time is specified in production standard.
Test Principle：
Sample shoes were placed in a continuous heating basin, basin and heating temperature from room temperature to the test temperature and record the change of the internal temperature of the sample shoes what had happened, continue to maintain test temperature to do test, until the test time finished, then check the functional damage of shoes.
Standards：
ISO 20344 section 5.12.
GB/T 20991 section 5.12.
AS/NZS 2210.2 section 5.12
Specification：
Sandbath Size：(40±2*40±2)cm，Height>5cm
Hot Plate Temperature Range：RT~250°C(Accuracy ±5C)
Temp Sensor inside Shoe：Soldered on a thick (2 ± 0.1 mm) diameter (15 ± 1 mm) copper plate
Stainless steel balls：Diameter 5mm, 4kg
Power：1∮, AC220V
Accessories：Stainless steel balls (4kg)
Temperature Recorder 1set
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High-Power Lamp tube （1500W~12000W) | Applicable Standards High-power lamp tubes adhere to global safety and performance benchmarks, including: IEC 60598-1(Luminaires – Genera... |
 |
Geotextile Effective Aperture Tester丨Geotextile Test Machine | Scope of application: The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile s... |
 |
Rubber Resilience Tester | Rubber Rebound Resilience Tester | Standard Complies withISO 4662:1986(international),JIS K6255(Japan), andGB/T 1681(China) standards for standardized resilience testing of vulcaniz... |
 |
Hot Tack Tester / Heat Seal Tester | Standards GB/T 34445 - 2017 ASTM F2029 Main Uses The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking ... |
 |
Heel Fatigue Tester ISO 19956 | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
