MARK-II Slip Resistance Tester ASTM F1677

• 

Product Introduction:

Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotating support frame on the test fixture, so that the test piece is pressed on the floor interface by a fixed force, and tilt the rotating support frame of the portable MARK-II anti-slip testing machine, so that the horizontal thrust subjected to the test piece is gradually increased. Until the test piece slides instantaneously. The value of friction coefficient that should be dealt with before the sole test piece slides instantaneously is the large static friction coefficient of the test sole on the floor interface, that is, the anti-slip coefficient.

Reference standard:

ASTM F1677 and other standards

Product Advantages:

Measures Key Safety Property: Quantifies the static coefficient of friction, a critical indicator of pedestrian slip resistance.

Standard Compliant: Designed to meet standards like ASTM F1677. ensuring tests are conducted according to recognized procedures.

Portable Design: Allows for convenient in-situ testing on actual flooring surfaces in various environments.

Provides Quantitative Result: Delivers a numerical value for the anti-slip coefficient.

Relatively Simple Operation: The test principle of applying load and increasing horizontal force until slip is straightforward.

Suitable for Floors and Sole Materials: Can be used to evaluate both flooring surface characteristics and the slip properties of footwear sole materials.

Product Features:

Based on the provided description and typical portable static friction testers:

Test fixture or shoe to hold the test sample.

Weight system to apply a fixed normal load (10 lbs).

Rotating or tilting support frame mechanism to apply and gradually increase horizontal thrust to the test sample.

Sensor or gauge to measure the horizontal force at the point when the sample begins to slide.

Mechanism to calculate the static coefficient of friction from the measured forces.

Designed to be portable for easy transport and use in different locations.

Accommodation for specific sample dimensions (76mm x 76mm).

Requires a stable, horizontal surface for accurate testing.

Technical specifications:

1. Sample size: (76±1)*(76±1)mm.

2. Load: 10IBS.

3. Floor requirements: horizontal floor.

4. Volume: 40*22*39cm.

Другие товары поставщика

	Dynamic footwear water penetration tester / SATRA TM 230	Application: Dynamic Footwear Water Resistance Tester is designed to determine the dynamic water resistance of all types of shoes. Principle： Th...
	Aluminum Ointment Tube Toughness Tester	The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so...
	Thermostatic water tank tester丨Thermostatic water tank machine	Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ...
	High and low temperature memory impact testing machine	Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,...
	Computer controlled electronic universal testing machine	Product Introduction 1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 fo...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...