Midsole Fibreboard Bending Test Machine - STD G664

Product Introduction:

G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.

One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.

Reference standard:

QB/T 1472. BS 5131:4.2. SATRA TM3. PM4. PM5. PM6. PM15. PM16. QB/T4329-2012 standard

Product Advantages:

Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.

Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).

Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.

Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.

Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).

Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.

Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.

Product Features:

Multiple test fixtures/stations (6) for simultaneous testing.

Clamping mechanism at one end of each station to fix the fibreboard sample.

System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.

Mechanism for continuous reciprocating bending of the samples through a 90° angle.

Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.

LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.

Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.

Designed for testing fibreboard samples of a specific size (80x10mm).

Technical specifications:

1. Test fixture: 6

2. Test piece: 80×10mm

3. Reciprocating Angle: 90°

4. The weight includes the clamp: (2±0.01kg)×6

5. Tortuous speed: (60±10)r/min

6. Counter: LCD, 0——999999(7 groups)

7. Sample holder: upper clip length 15mm, lower clip length 10mm

8. Motor: variable frequency motor

9. Volume: 109×26×34cm

10. Power supply: 1∮，AC220V,3A

Другие товары поставщика

	Taber Abrasion Resistance Tester	Taber Abrasion Tester is also referred to as Taber abraser or Taber abrader, which is used to evaluate the wear resistance of materials or finished...
	Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer	Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres...
	Multilayer geotextile single-layer thickness tester丨IS0 9863	Meet the standard GB/T17598-1998. GB/T 13761.1-2022. JTG E50-2006. IS09863-90 Scope of application The multi-layer sample is mechanically separa...
	Temperature and Humidity Test Chamber / Temperature & Humidity Tester	Features and Benefits 1.Wide Temperature Range：Selectable from -20°C, -40°C, -60°C, or -70°C up to +150°C, with a high-efficie...
	STD G651 national standard shoe bending tester	Product Introduction: National standard shoe bending testing machine is specialized in testing finished shoes and soles, after a long time, fixed ...

Все товары поставщика

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...