Safety Helmet Flammability Tester / Flammability test equipment

• 

Product Introduction:

Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, easy to operate, widely used in safety hat manufacturers, major quality inspection units and construction engineering testing stations.

According to the criteria:

GB/T 2811-2007 "Hard Hat"

GB/T 2812-2006 "Safety Helmet Test Method"

GB/T 38305-2019 "Head Protection Rescue Helmet"

CEISO9001 1S017025

Product Features:

Standard Bunsen burner with a specified inner diameter (10mm) to provide the test flame.

Mechanism for positioning the Bunsen burner flame relative to the safety helmet or test specimen according to the standard's requirements.

Igniter timing system to control the duration for which the flame is applied to the specimen, with a wide adjustable range (0-999.9 seconds) and a typical setting (10 seconds).

Follow-on timer system to accurately measure the afterflame time (how long the specimen burns with a flame after the Bunsen burner is removed) and afterglow time (how long the specimen continues to glow without a flame), with a specified accuracy ($pm$0.01 seconds).

Flame length measuring device with a scale (50mm length) to ensure the test flame is set to the correct size.

Capability to use specified gases (methane, propane, butane, LPG) as the fuel for the Bunsen burner, as required by the test standard.

Fixture or system to securely mount the safety helmet or a test specimen cut from the helmet for testing.

High degree of automation for the test procedure, from flame application to timing.

Safety features (implied) for conducting flame tests.

Main parameters:

Inner diameter of Bunsen burner: 10mm

Igniter timing: 0 —— 999.9 seconds arbitrary setting, the international adoption of 10 seconds

Follow-on timer: 0 —— 999.9 seconds, accuracy: ±0.01 seconds

Flame length measuring device: scale length 50mm

Gas used: methane, propane, butane, LPG 3W '

Power supply: AC220V, 50Hz, 50W

Другие товары поставщика

	Blood Bag Emptying under Pressure Tester	The Blood Bag Pressurization and Emptying Tester plays a crucial role in the medical field. The following is a detailed introduction to its main us...
	Geotextile wear tester丨Geotextile Test Machine	Scope of application: The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the expe...
	Geosynthetic Transmissivity Tester丨Geotextile Test Machine	Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
	Suture Needle Cutting Force Tester YY 0166	The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri...
	Yellowing resistance test chamber / Yellowing Resistance Chamber	Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...