Film impact tester ISO 6272
Product Introduction
The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film sample, measures the energy consumed by the punch, and evaluates the anti-pendulum impact energy of the film sample.
The sample to be measured is placed in the middle of two splints to clamp, and the pendulum is adjusted by counterweight to form enough mechanical energy to impact the surface of the sample to be measured during the impact process to break down or not break down the sample to be measured. The energy borne by the sample to be measured is the loss part of the total mechanical energy formed by the pendulum during the impact process, and is read out on the dial through the pointer.
Standards
ASTMD3420-2014、GB8809-2015、GB/T 20624.1—2006/ISO 6272-1:2002、ASTM D2794—2019;
Performance parameters
- Full range of dial: 3J/(30cm.kgf)
- Maximum impact energy: 3J
- Hammer diameter: Φ25.4mm: suitable for test specimens with diameter of medium 50-60 (Class A test in the standard); Φ19mm: Suitable for testing specimens with a diameter of 89 (Class B test in the standard)
- Reading dial minimum scale value: 0.020J/ grid (0.20cm.kgf)
- Specimen clamp diameter: Φ89mm, Φ60mm
- Swing range: R300mm
- Swing Angle: 90°
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer | Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres... |
 |
High Acceleration Shock Test System / Shock Test Machine | Applications: The size of the impact test bench is small, and the bench structure is carefully designed after finite element optimization analysis... |
 |
Electro-hydraulic servo dynamic fatigue testing machine | Product Introduction: Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly u... |
 |
SUGA S80 Carbon Arc Weathering Tester | Applicable Standards The SUGA S80 adheres to globally recognized standards, including: ISO, AATCC, ASTM(e.g., ASTM G152. ASTM D822 for coatings... |
 |
Pinhole Tester / Pinhole Testing Equipment | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials. The following is a detail... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
|
|
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
