Constant elongation stress meter | Tensile Testing Machines
Standard
constant tensile stress meter conforms to the standard GB/T 21461.2-2008 Plastic ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: specimen preparation and performance determination, I SO11542-2: 1998.
Usage
Constant tensile stress meter is an instrument to determine the tensile stress of molded plastic materials. It is also a kind of instrument used to characterize the index of PE-UHMW viscosity properties.
Features
1、This tester adopts single-chip microprocessor and temperature control module as the main control unit, featuring stable use and reliable action.
2、Lifting control is controlled by metal proximity switch, and the main transmission part is precision ball screw.
3、Measurement of stretching length adopts photoelectric sensor to sense the signal.
4、The design of brake adopts the downward sliding structure without lateral movement, and the electric control opens automatically. The front and back of the thermostatic oil bath are equipped with high temperature resistant tempered glass to increase the observability of the test.
5. The operation terminal (computer) is installed with Windows system and the software used in this test, and the user does not need to install it again. The role of the base is specially designed for this test machine, the user in addition to its use as the base of the instrument, but also can be used as a storage cabinet for accessories.
Technical parameters
1. weight quality: 80g, 100g, 120g, 150g, 180g, 200g, 225g, 250g, 275g, 300g, 325g, 350g, 40 0g, 500g, 600g, 700g, 800g (can be increased according to user requirements)
2、Timing accuracy: 0.1 seconds
3、Extension measurement: 90mm
4、Temperature range: room temperature - 150 ℃ (according to user requirements)
5、Heating medium: phenylmethyl silicone oil
6、Sample size: dumbbell type 50*4
7、Voltage：220V 50Hz
8、Power: 6.3KW
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Catheter Residual Vacuum Tester YY/T 0339 | Compliance Standards YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc. Main Uses The catheter residual vacuum tester is mainly ... |
 |
Temperature and Humidity Test Chamber / Temperature & Humidity Tester | Features and Benefits 1.Wide Temperature Range：Selectable from -20°C, -40°C, -60°C, or -70°C up to +150°C, with a high-efficie... |
 |
Motorized Notching Machine / Notching Machines | Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne... |
 |
Foam cutter / Foam cutter machine | Standards JB/T 11346-2013 EN 12100 UNE-EN 14886:2008 Scope of application This machine is mainly used for cutting foam materials, which can cu... |
 |
Dry heat shrinkage tester / Heat Shrinkage Testing Equipment | Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
