TTF tensile testing machine / TTF Tensile Tester

Product Introduction:

The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys

Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.

Parameter theoretical maximum push/pull 188/168 Kgf

Maximum travel 150 mm

Speed 50-800 mm/s

Volume 1620×320×421 mm

It weighs about 81kg

Standards：

EN 71-1

ASTM F963

16 CFR 1500

ISO 8124-1

GB 6675-2

TTF test method:

Applicable: All McDonald's products required for TTF testing.

All kinds of children products can be tested on the TTF Tensile Tester.

Purpose:

Collect and analyze data to assess process capability and deviation of the production process to further

To evaluate the safety and reliability of the product.

Test conditions:

Room temperature: 23±2℃， humidity 20% —— 70%.

TTF test machine travel speed: 0.7±0.1in/sec.

TTF test engine air pressure: 60±10psi (4.2±0.7kgf/cm)

TTF test operation procedure:

Check/adjust the test environment to meet the requirements (room temperature: 23±2℃; Humidity 20% —— 70%)。

Check whether all components on the TTF machine are in good condition and connected/secured.

Open the air pressure pump and adjust the air pressure valve of the air pressure pump to make the air pressure of the air pressure pump meet the requirements (60±10psi)。

Adjust the pressure valve of TTF machine to make the pressure reach the requirement (60±10psi)。

Start the TTF machine and check whether the TTF machine is normal (such as whether the taxi is smooth, etc.)。

Install the tension pound and adjust the intake valve on the pneumatic machine of the TTF machine to make its travel speed reach the requirement (0.7±0.1in/sec)。

Position adjustment of TTF machine.

After alignment adjustment, secure the position.

Test fixture specified in the force bitmap /TTF test demonstration diagram.

The sample process must be placed in the required environment (room temperature 23±2℃， humidity 20% —— 70%) for 4 hours before it can be carried out.

Performing a Test.

Record the test result After the Test.

Technical Parameters:

1. Theoretical Maximum Push/Pull Force: 188/168 kgf

2. Maximum Stroke: 150 mm

3. Speed: 50-800 mm/s

4. Dimensions: 1620 × 320 × 421 mm

5. Weight: Approximately 81 kg

Другие товары поставщика

	AT1000 Abrasion Resistance Tester	Device description The at1000 wear tester has been used around the world since 1970 and is ideal for comparison and quality control of platelet-sh...
	Rubber non-rotor vulcanization Tester丨 Rubber Testing Instruments	Product Introduction: Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic rese...
	Fabric Drying Tester	Product Introduction: This device is developed for the automatic test of "dryness" method A and method B specified in JIS L 1096 (Fabric test meth...
	Textile Point-to-Point Resistivity Tester / Textile and Apparel	Product Information: It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "S...
	Shoe Heel Impact Fatigue Tester / Shoe Heel Fatigue Tester	Meet the standard BS-5131 SATRA TM21. etc Main uses Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance ...

Все товары поставщика

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...