A Bottle Cap Torque Tester
A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to bottle caps during sealing or opening processes. Its primary purpose is to ensure that bottle caps are properly tightened to prevent leakage or contamination of the contents within the bottle. Conversely, it can also be used to measure the torque required to open bottle caps, which is useful for assessing consumer usability and product quality.
Test Standard：
ASTM D2063.
ASTM D3198.
ASTM D3474.
BB/T 0025.
BB/T 0034.
GB/T 17876
Applications:
Bottle Packages
Application and removal torque test of the bottle caps for bottled packages for food, pharmaceuticals, e.g. beverage or tablet bottles
Flexible Tube Packages
Application and removal torque test of flexible tube packages for food, pharmaceuticals and cosmetics, e.g. eye-drop, hand cream and shoe polish
Screws
Application and removal torque test of the screws
Vacuum Flasks and Vacuum Cups
Application and removal torque test of the caps of vacuum flasks and vacuum cups
Features Include：
Moveable 1.25″ (31 mm) length posts accommodate a wide range of sample shapes and sizes
Available extended post lengths and other gripping options
USB, RS-232. Mitutoyo, and analog outputs
Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
First / second peak detection for slip and breakaway torques in tamper evident closures
1.000-point data memory with statistics and outputs
Password protection prevents unauthorized changes
Programmable set point indicators and outputs for pass/ fail determination
High-speed 7.000 Hz sampling rate accurately captures peak torque values
Configurable audio alarms and key tones
5 selectable units of measurement
Lite data collection software included
Technical Specifications：
Load Cell Capacity：5 Nm (Standard)、20 Nm (Optional)、40 Nm (Optional))
Accuracy：Indicated Value ±0.5%(10%-100% of Load cell capacity、±0.05%FS (0%-10% of Load cell capacity)
Resolution：0.0001 Nm
Body Clamp Range：Φ5 mm ~ Φ170 mm
Cap Clamp Range：Φ10 mm ~ Φ80 mm
Bottle Height：20 mm ~ 400 mm
Specimen Clamping and Turning Way：Pneumatic
Maximum Auto Removal / Application Torque：2 Nm (customization available for other specs)
Gas Supply：Air (Not in supply scope)
Gas Supply Pressure：0.7 Mpa (101.5psi)
Statistical Analysis Allowance：0 ~ 999
Instrument Dimension：550 mm (L) x 365 mm (W) x 1150 mm (H)
Power Supply：220VAC±10% 50Hz / 120VAC±10% 60Hz
Net Weight：39 kg
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Qinsun SUNTEST CPS+ | A practical desktop xenon lamp equipment with various accessories, customized to meet your SUNTEST needs. Here, you can see SunCool cooling devic... |
 |
Schopper Folding Endurance Tester ISO 5626 | Use and Scope of application: 1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding d... |
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Rubber Mooney Viscosity Tester 丨Mooney Viscometer | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
 |
Auto - ignition Point Tester for Liquids / ASTM E659 | Standards This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) ... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
