Fabric Hand Touch Feel Tester softness value Test

• 

Brief Introduction：
By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material.
At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators

Product Description：
The new type of concrete works softness measuring method is as follows: The main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions.
For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position.
Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component.
Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed.
Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.

Technical Data：
Software: friendly interface, simple operation. Test data can be stored for a long, always call data storage software, data were compared with the current test.
Sample size: φ112.8 mm
Measurement: smoothness / roughness, softness, stiffness, feel value (HF)
Measuring pressure: 100mN, 600mN
Instrument size: 440x190x470 mm (H x W x D)
Weight: 19 kg
Power supply: 115-230 VAC, 50/60 Hz

Другие товары поставщика

	Digital Hydraulic bursting strength tester	Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli...
	Stoll Quartermaster and universal wear friction testing machine	Universal Wear Tester, to determine the wear and abrasion resistance of fabric used in clothing, footwear and industries. This Wear Testing Machine...
	Automatic Filter Measuring Device	The filter measuring device consists of 2 components: Filter measuring device FMP 03and universal filter holder FH-143/149 automatic. The automatic...
	Tearing strength tester with Elmendorf method	Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof f...
	Taber abrasion resistance test machine	Range of applicationTABER abrasion resistance tester and wear resistance tester can be replaced by wheel and weight,which apply to the abrasion res...

Похожие товары

	BS EN 12600 Two Tyres Impactor	Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd.	Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...
	Hast Pct High-Low Temperature Test Chamber with Pressure	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali...
	Programmable Hast Accelerated Aging Tester for Industry	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ...
	CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th...
	Package Large Scale Simulation Transportation Vibration Tester	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	This machine is used to simulation testing damage between transport for various package stuff, PC...