Mask Breathing resistance testing machine EN149-2009 section 7.15 EN 13274-3

• 

Standards:

EN149-2009 section 7.15. 8.3.4. EN 13274-3. GB 19083. GB 2626. NIOSH 42 CFR Part 84. JIS/T 8151

Mask Breathing resistance testing machine：

Mask Breathing resistance testing machine is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the specified conditions.The flow rate for inhale resistance test is 30L/min and 95L/min.

The flow rate for exhale resistance test is 160L/min. And the flow rate for the flow impact test is 300L/min.Applicable to the national labor protection supplies inspection agency, mask manufacturers related inspection and inspection of ordinary masks, dust masks, medical masks, anti-fog mask products.

Mask Breathing resistance testing machine Maintenance:

1. Do not carry it by the bottom of the control box during transportation to avoid being crushed.

2. Please wipe the electroplated part with oil to prevent rust and keep bright.

3. After the test, please wipe the machine clean, and regularly oil the active fulcrum to increase its service life and sensitivity. (The lubricating oil can be mixed with butter and a little engine oil)

4. Please wipe the panel (control box or display) with a dry cloth to prevent it from getting wet, so as not to damage the IC electronic parts.

5 Please place all fixtures and joint accessories properly, and wipe off the anti-rust oil to prevent rust.

Non-woven Mask Respiratory Resistance Tester Features:

1. Touch screen control, English menu, man-machine dialogue mode, easy operation.

2. Built-in thermal printer, it is convenient to quickly print test results on site.

3. Two modes of breath detection and inhalation detection can be set.

4. The automatic switching device of the respirator pipeline solves the problem that the tester pulls out the

pipe and accidentally connects the pipeline when testing.

5. 3D printed standard head mold, which simulates the actual inhalation and exhalation of the human body,

improving the accuracy of the data.

Другие товары поставщика

	Photovoltaic module damp heat test chamber	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo...
	SCHAP Pilling Tester for Fabric & Textile Durability Tester	Standard AATCC 135(Dimensional Changes in Automatic Home Laundering) ISO 12945-2(Textiles - Determination of Fabric Propensity to Surface Fuzzing...
	Textile Thermal Insulation Property Tester	Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective clothing and industrial fabrics. BS 6526:...
	Battery Powder Compaction Density Measurement System	Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Powder Tapped Density Analyzer provides certified results fo...
	Photovoltaic module wire tube bending testing machine	Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Euro...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...