Convective Heat Resistance Tester

• 

Standards

ISO 17493 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven

Applications

The equipment oven is designed to test the convection thermal protection performance of different products, such as fabrics, gloves, shoes, helmets, glasses and other products.

Product Information

Introduction

The instrument is used to determine the thermal resistance of protective clothing materials or samples and protective equipment by exposing the sample in the test condition of hot air circulation oven.

Features

Instrument Structure:

The metal frame of this instrument is equipped with rock wool thermal insulation layer. The door is used to enter the air circulation oven. The size of the door window is 460x580mm, made of a double-layer 4mm heat treatment and transparent glass. The oven operation temperature is as high as 300 ℃ , and the test automatically operates at (185 + / - 5℃) or (260 + 5℃). The fan air velocity is 0.5 m/s to 1.5 m/s. The thermocouple is located in accordance with the requirements of standard. The switch on the door is used to stop or start the hot air circulation for test running. Display failure and the achieved temperature. The voice signal of timer prompts the test time. The system can fix and suspend samples. The power of internal lamp is 2 x25w. The on/off switch can be used to control the equipment, interior lights and the mobile platform with clamps.

Operation Principle:

·Initiate the oven and heat up to the test temperature. Allow test temperature to be stable for at least 30 minutes.

·Open the door and place the sample in the air circulation oven within 15s.

·When the thermocouple recovers to test the temperature ±5℃ and maintain 5 minutes, the test exposure time starts.

·Test begins execution at (185±5)℃ or(260±5)℃.

·After the specified exposure time, the sample is removed, and the samples are checked for evidence of carbonization, embrittlement, burning, melting or splitting

Technical Parameters

Другие товары поставщика

	Standard pacifier safety tester	Overview： In the infant care industry, bottle quality directly impacts infant health. The NPNZ-01 Baby Bottle Mechanical Performance Tester is spe...
	Coating abrasion resistance tester	Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met...
	Sample cutter 100cm	Sample cutter 100cm - Other test instrument - standard Standards: Applications: The application of sharp cutter wide. Even difficult mat...
	Rubber low temperature brittleness testing machine	Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample ...
	BBA steady state solar simulator tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...