Total Hip Joint Prostheses Wear Tester

Standard

YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and environmental conditions.

ISO 14242-1:2014 (International): Defines protocols for simulating physiological loading and kinematics during hip joint wear testing.

ASTM F3047M-15: Additional compliance for advanced testing scenarios including edge loading and micro-separation.

Product Advantages

Triaxial Motion Simulation: Replicates full physiological motion profiles (flexion/extension ±100°, abduction/adduction ±30°, internal/external rotation ±40°).

Dynamic Load Control: Dual-peak loading up to 4.500 N with 0.1% force accuracy.

Biorelevant Environment: Temperature-controlled (37±2°C) lubrication bath with 30±2 g/L protein concentration.

Extended Durability: Capable of 5+ million cycle testing with <0.5% drift in calibration.

Automated Compliance: Pre-programmed ISO/YYT test protocols with real-time data validation.

Modular Design: Six-station configuration allows parallel testing of multiple specimens.

Product Features

Electrohydraulic Actuation: Six independent servo-hydraulic actuators for precise motion control.

3D Force/Torque Sensors: Multi-axis sensors measure axial forces and torsional moments simultaneously.

Temperature-Controlled Bath: Recirculating lubrication system with protein concentration monitoring.

High-Resolution Imaging: Optional integration with micro-CT systems for in-situ wear analysis.

AI-Powered Analytics: Machine learning algorithms predict wear rates from initial test cycles.

Safety System: Emergency stop, over-pressure relief, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Angular Motion Range	Flexion/Extension: ±100° Abduction/Adduction: ±30° Rotation: ±40°
Max. Axial Force	±4.500 N (1.000 N resolution)
Load Control Accuracy	±0.5% of reading (0–4.500 N)
Frequency Range	0.1–5 Hz (programmable waveforms)
Temperature Control	37±2°C (PT1000 sensors)
Lubrication System	15L capacity with protein skimmer and bubble trap
Data Acquisition	100 kHz sampling rate (16-bit resolution)
Power Requirements	220V/110V ±10%, 50/60Hz, 2.500W
Dimensions (W×D×H)	1.800 × 1.200 × 2.000 mm
Weight	950 kg (including bath and control cabinet)
Noise Level	<65 dB (A-weighted)

Standard Accessories

Hip Simulator Fixture Kit:

Self-centering femoral head adapters (16–32 mm)

Acetabular cup positioning jigs (60° inclination standard)

Biorelevant Bath System:

15L capacity with recirculation pump and protein skimmer

316L stainless steel construction with HEPA filtration

WearMaster Pro Software:

Automated wear rate calculation (mass loss/volume displacement)

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (1–50 Nm)

Specimen alignment gauges (ISO 14242-1 compliant)

Calibration Bundle:

NIST-traceable force calibration weights

Angular encoder verification tool

Safety Kit:

Laser safety curtains

Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Ink drying apparatus	How it works: The working principle of the ink drying instrument is based on simulating the drying environment of the ink in the printing process,...
	Floor Caster Wear Test meter	Meet the standard: GB/T 11982.2. GB/T 4085. BS/EN 425. ISO 4918-2009 ASTM D6962 BS EN 425-2002 BS EN 985-2001 ISO 10581-2011 ANSI-NALFA-LF...
	Sports Shoe Cushioning Performance Tester	Standard SATRA TM142 ASTM F1614 ASTM F1976 Product Advantages 1. Uncompromising Precision Hemispherical Impactor: 45mm diameter (37.5mm radiu...
	Automatic Reaction Calorimeter	Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati...
	Helmet Projection and Surface Friction tester	The helmet projection and surface friction tester is a device used to test the frictional force between the helmet surface and other objects. Its m...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...