Fiber Blend Ratio Tester

• 

Product Introduction:

It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the specific resistance value of the fiber according to the filling degree of the fiber

Applicable standards:

GB/T 14342-1993 "Synthetic short fiber specific resistance test method"

Technical parameters:

1. fiber specific resistance measurement range :10^6Q——10^13Q

2. test sample weight :15g

3. the measurement voltage is 50V, 100V, the deviation is less than 5%

4. working environment temperature :20℃ —— 2℃， humidity :65% —— 10%RH

5. the instrument in a stable operating voltage and no signal input between 1- 8 hours of zero drift less than 4% soil

6. the basic error of the instrument to the standard resistance measurement :≤ soil 20%

7. Power supply :AC220V

8. overall size :450x265x133mm(LxWXH)

Product Advantages:

Standard Compliance: Adheres to the latest national standard GB/T 14342-2015 for specific resistance testing of man-made staple fibers.

Wide Measurement Range: Capable of measuring fiber specific resistance from 106Ω to 1013Ω.

Accurate Voltage Application: Provides precise 50V and 100V measurement voltages with less than 5% deviation.

Stable Operation: Designed for stability in specified working environment conditions (temperature and humidity), ensuring consistent results.

Low Zero Drift: Exhibits low zero drift (less than 4% over 1-8 hours) when operating voltage is stable and no signal is input.

High Basic Accuracy: Features a basic error of ≤±20% against standard resistance measurements.

Compact Design: With its overall dimensions, it is suitable for laboratory benchtop use.

Indirect Measurement: Ingeniously converts the measured resistance of a compacted fiber sample to the specific resistance of the fiber.

Product Features:

Resistance Measurement System: Core component for accurately measuring the resistance of the fiber sample.

Fiber Compaction Chamber: A mechanism to pack the test sample (15g) to a specific density and geometry, crucial for converting bulk resistance to specific resistance.

Voltage Application: Applies stable test voltages of 50V and 100V.

Digital Display (Implied): For presenting the measured resistance values and calculated specific resistance.

Environmental Condition Requirements: Designed to operate accurately within a specified temperature range (20∘C±2∘C) and humidity range (65%±10%RH).

Stable Design: Components and circuitry engineered for minimal zero drift over prolonged periods.

User Interface: (Implied) for setting parameters and initiating tests.

Другие товары поставщика

	Rubbing Abrasion Testing Machine	T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi...
	BBA steady state solar simulator tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...
	Pneumatic Sample Cutting Press STD-AG25	PRODUCT DETAIL STD-AG25-Pneumatic Sample Cutting Press Application Of Pneumatic Sample Cutting Press Pneumatic Sample Cutting Press is a new typ...
	Particle Abrasion Tester	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...
	Textile Flatness Tester	I. Product Overview TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness vari...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...