Protective Clothing Synthetic Blood Penetration Tester

• 

Introduction

It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure.

Standard

GB 19082-2003《Medical disposable protective clothing technology requires synthetic blood penetration test method》;

ASTM F1670 / F1670M - 17a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

working principle

Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.

Sample preparation

In the sample of each protective suit, 3 pieces (75*75) mm are randomly selected. When conducting the experiment on the composite or multi-layer materials, the edges should be sealed and the diameter shoud be kepted greater than 57mm for testing.

Instrument characteristics

1. The instrument adopts the air source which can provide (0.5---30 + 0.1)kPa pressure to continuously pressurize the sample, and is not subject to the space limitation of the test site;

2. The range of air pressure can be set freely and set range (0.5---30)kPa;

3. Color touch screen display, Chinese and English operation menu, user can freely choose the language operation;

4. The sample surface is made of imported special aluminum profiles, with light material, smooth surface and never rust;

5. The instrument adopts imported special aluminum drawing panel with metal buttons;

6. The instrument is equipped with a sample automatic clamping device without manual clamping;

7. The test tank is equipped with special fixed device to facilitate customer operation;

8. The test tank is made of high quality 316 stainless steel, with high transparent and high intensity protective cover.

9. Square metal block: open space is more than 50%; Under 30kPa, the bending is less than 5mm;

10. The precision of instrument time control is less than 0. 1 second;

11. High quality metal baking paint is used for the whole machine shell.

Technical Parameters

1. Pressure range and measurement accuracy: 0 ~ 0.04MPa (4mH2O) (31.4kg) accuracy: + 1kPa.

2. Sample size: 75mm * 75mm, under pressure area: 28.26 square centimeters.

3. Power supply: AC220V, 50Hz, 100W.

Другие товары поставщика

	Safety Helmet High Temperature Pre-Treatment Chamber	Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Techni...
	Automatic voltage internal resistance tester	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument...
	Rapid Crack Propagation Tester	The Rapid Crack Propagation Tester is primarily used for testing the critical pressure and critical temperature performance of thermoplastic pipes ...
	Direcct flame impingement Tester with BS 476-12，Surface spread of flame test	Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu...
	Hydrogen Sulfide Corrosion Test Chamber	Referenced Standards: Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...