Safety Helmet Roll-off Testing Equipment
Purpose
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Test standard:
IS 4151 , ECE R22.05
Mass of initial load: 3 kg ± 0.1 kg
Mass of falling weight: 10 kg ± 0.01 kg
Lowering height: 0.5 meters ± 0.01 meters
Measuring method: manual
Electricity: 220V 50HZ
Test theory: vertical descent
Test steps:
1. previously to the ambient temperature and sanitary conditions for the conditions of the helmet, should be placed on the appropriate head shape and fixed in the appropriate head.
2. In the median vertical plane of the helmet, a device that guides and releases the fall with a total mass of 3 kg ± 0.1 kg is attached to the rear of the shell.
3. 10 kg ± 0.01 kg of falling mass is released and lowered from a height of 0.5 m ± 0.01 m. The guiding device should ensure that the impact velocity is not less than 95% of the theoretical velocity.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Micro Rapid Closed Cup Flash Point Tester | Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094 GB/T 261. GB/T 21615. ASTM D93 GB/T 5208. GB/T 21790. A... |
 |
Large Flame Flammability Tester | IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
 |
Песк - падающая машина для испытания шлемов мотоцикла | Основные целиВ основном используется для проверки абразионно-устойчивости линз очков шлема и оценки их способности сопротивляться повреждениям, выз... |
 |
Catheter Friction Tester | Standards YY/T 1536 - 2017 TCAMDI 021 - 2019 Main Uses The catheter friction performance tester is a professional instrument used to detect the... |
 |
Leather Seam Fatigue Tester | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
