Rubber low temperature brittleness testing machine
Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according to GB/T 15256 and GB/T5470 standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds. Standards： 1. ISO812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness 2. GB/T 15256 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness 3. JIS-K-6261-2006 Rubber, vulcanized or thermoplastic - Determination of low temperature properties 4. ASTM D2137 Rubber property-Brittleness point of flexible polymers and coated fabrics Technical parameter: 1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose) 2. cooling speed: 0 ℃ —— 1.2 ℃ —— 20 ℃ / min - 20 ℃ —— 1.0 ℃ to 30 ℃ / min - 30 ℃ —— 0.7 ℃ to 60 ℃ / min -40℃——-60℃ about 0.7℃/min -60℃——-80℃ About 0.5℃/min Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened. 3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃ 4. overall size: 900×505×800mm (length × width × height) 5. the overall size of the studio: 220×170×70mm (length × width × height) 6. cooling medium: ethanol or other non-freezing liquid 7. mixing motor: 15W 8. working power supply 220V——240V,50Hz,2kW
Другие товары поставщика
|
|
Lateral Rigidity Tester for Safety Helmets |
Standard
GB 2812: Safety Helmets (China National Standard)
Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deforma... |
|
|
Aircraft Component Combustion Testing System |
Product description:
With the increasing maturity of aviation technology, the flame retardant performance tester of aviation materials has been pa... |
|
|
Sliding Bearing Fatigue meter |
Standards
ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454
Material Research and Development
During the re... |
|
|
Large Flame Flammability Tester |
IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
|
|
Spring tension testing machine |
Product Introduction:
The spring tension and compression testing machine has accurate loading speed and force measurement range, and has high prec... |
Все товары поставщика
Похожие товары
