Bio-absorbable Internal Fixation Plates Tester
Standard
YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axial pull-out, torsion, and 4-point bending tests.
ASTM F2502-17 (International): Defines methodologies for evaluating the structural integrity of bioabsorbable fixation devices under physiological loading.
ISO 13779-4: Additional compliance for in vitro degradation testing of resorbable materials.
Product Advantages
Multi-Modal Testing: Single platform for axial pull-out, torsion, and 4-point bending tests.
Biodegradation Simulation: 37±1°C pH-controlled water bath with real-time conductivity monitoring.
High-Resolution Sensors: 0.001 N force/0.001 Nm torque resolution for fragile polymer testing.
Modular Fixturing: Self-centering clamps accommodate plates (20–100 mm) and screws (2.0–4.5 mm).
AI-Powered Analytics: Machine learning predicts degradation-induced strength loss over time.
Regulatory Compliance: Pre-loaded YY/T 0509/ASTM F2502 protocols with automated reporting.
Product Features
Electromagnetic Servo Actuator: 5 kN axial/1 Nm torsional capacity with programmable load ratios (R=0.1–10).
4-Point Bending Fixture: Anatomical curvature adapters replicate physiological stress patterns.
Dynamic pH Control: 37±1°C water bath with pH 5.5–8.0 adjustment for degradation studies.
High-Resolution Imaging: Built-in 5MP camera system for crack/corrosion analysis.
Safety Suite: Emergency stop, chemical-resistant enclosure, and leak detection.
Touchscreen Interface: Intuitive controls with pre-loaded ASTM/YY test sequences.
Accessories
Bioabsorbable Fixture Kit:
Self-centering plate clamps (20–100 mm compatibility)
Screw torque adapters (2.0–4.5 mm diameter)
pH-Controlled Water Bath:
15L capacity with recirculating pump
Corrosion-resistant titanium interior
BioTest Pro Software:
Automated degradation curve generation and strength retention analysis
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
Operator Kit:
Calibrated torque wrench set (0.1–1 Nm)
Implant alignment jigs (ASTM F2502 compliant)
Calibration Bundle:
NIST-traceable force/torque calibration weights
pH electrode calibration solution
Safety Kit:
Chemical-resistant gloves
Acoustic enclosure with 25 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±5.000 N (0.001 N resolution) |
| Max. Torsional Moment | ±1 Nm (0.001 Nm resolution) |
| Bending Span | 40–120 mm (1 mm increments) |
| pH Control Range | 5.5–8.0 (0.1 resolution) |
| Temperature Control | 37±1°C (PT1000 sensor) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1.200W |
| Dimensions (W×D×H) | 500 × 450 × 750 mm |
| Weight | 75 kg (net) / 90 kg (with bath) |
| Noise Level | <50 dB (A-weighted) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
" Helmet Surface Friction Testing Machine" | Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi... |
 |
Spray Aerosol Ignition Distance Tester | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distanc... |
 |
" Adiabatic Rate Calorimeter " | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Multi Finger Scratch/Mar Tester | Standards：Ford BN 108-13Resistance to scratchingGeneral Motors DMN3943、Danmler-Chrysler LP-463DD-18-01 Accessories： 1. Pneumatic, mobile platform... |
 |
Sliding Bearing Fatigue Testing Machine | Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the resea... |
Похожие товары
 |
FH-77 Dissolved hydrogen meter | Продавец: Коллирон электроникс лимитед | Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy... |
 |
Xenon Arc Weather Ometer | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | Продавец: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
