Safety shoe impact meter

According to the criteria

Bs-953.1870

EN-344.

ANSI-Z41

CSA-Z195

ISO K88782

EN ISO 20344.

ANSI-Z41

BS EN-344

CSA-ZI95

LD50-1994

AS/NZS 2210.2

GB/T 20991

GB 4014-1983

BS-953

EN 12568.

ASTM F2412

ASTM F2413-11

LD-50

CNS 6863-82

JIS-T8101:2000

Product Advantages

Measures Critical Safety Property: Quantifies the impact resistance of safety shoe toecaps, a fundamental requirement for protecting the wearer's feet.

Standard Compliant: Designed to meet numerous international and national standards (EN 344. ANSI Z41. CSA Z195. BS standards, etc.) for safety footwear impact testing.

Simulates Impact Hazards: Replicates the force of falling objects onto the toecap under controlled conditions.

Provides Objective Assessment: Allows for evaluation based on measurable criteria such as residual height and visual inspection for failure.

Accommodates Multiple Standards: Configurable to meet the specific drop hammer weights, falling heights, and impact energies required by different standards.

Robust and Durable: Constructed to withstand the forces generated during impact testing.

Essential for Certification: A necessary test for certifying safety footwear according to various protective standards.

Product Features

Drop hammer mechanism capable of holding and releasing a drop hammer from a specified height.

Capability to use different standard drop hammer weights, such as 20$pm$0.2kg (for EN standards) and 22.7kg (for BS, ANSI standards).

Adjustable falling height for the drop hammer, with a range typically from 0 up to at least 1100mm (for EN standards).

System for achieving specific impact energies, such as 200 joules (for EN standards) and 100$pm$2 joules (for BS, ANSI standards), which are determined by the drop hammer weight and falling height.

Standardized impact edge on the drop hammer, with specifications varying by standard (e.g., 3$pm$0.1mm radius for EN, $phi$25.4mm for ANSI).

Anvil or baseplate on which the shoe is placed for the impact test.

Fixture or system for securely mounting the safety shoe in the correct position for the impact test.

Mechanism for measuring the residual height inside the toecap after the impact.

Electric motor (DC 1/4HP) for raising the drop hammer to the required height.

Robust and heavy construction (approximately 227kg) to ensure stability during impact.

Technical parameters

Weight of drop hammer: (EN) 20±0.2kg,(BS,ANSI)22.7kg

Falling height: (EN) 0——1100mm

Impact capacity: (EN) 200 joules, (BS, ANSI) 100±2 joules

Impact edge: (EN)3±0.1mm(R)，(ANSI)ø25.4mm

Horsepower: DC 1/4HP

Volume: 58.5×69.5×181.5cm

Weight: 227kg

Power supply: 1∮，AC220V

Другие товары поставщика

	High Velocity Impact Testing Machine	Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL SA/...
	Vertical low temperature cold resistance meter	Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un...
	Automotive Solar Simulation Test Chamber	Applications Full Vehicle Sunlight Simulation Test Chamber is designed to evaluate the aging performance of complete assemblies or entire vehicles...
	Dental Implants Static Torsion Testing Machine	Standard ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data...
	Laminoplasty Plate System Fatigue Testing Machine	Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...