Building material combustion calorific value calorimeter

• 

Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision and other departments.

Standards compliant:

GB / T 14402-2007 "Combustion properties of building materials and articles - Determination of combustion calorific value"

Building materials burning calorific value tester / building materials burning calorific value detector

Main features:

1. This equipment is in the same kind of pre-product developed on the basis of a new type of analytical instruments;

2. Using high-end single-chip, large-screen LCD screen, the entire Chinese user interface;

3. Has a high precision measurement, small size, easy operation, automatic ignition, automatic water, water, mixing, calculation, printing and other characteristics;

4. It is one of the test methods to evaluate whether the combustion performance meets Grade A composite (sandwich) materials is used to determine the total calorific value and the net calorific value.

Building material combustion calorific value calorimeterTest principle:

Under standard conditions, a specific mass of the sample is placed in a constant volume of oxygen and nitrogen calorimeter, the test sample combustion calorific value of the equipment, under standard conditions, the test to test the temperature based on the consideration of all heatLoss, and latent heat of vaporization, calculate the combustion calorific value of the sample.

Main parameters:

1. Measurement principle: Oxygen bomb heat method

2. Measurement time: (30-60) min

3. Temperature resolution: 0.001 ℃

4. Ignition method: short circuit ignition

5. Ignition time: 5s

6. Ignition voltage: DC12V

7. Outside the water tank capacity: about 40L

8. Internal water tank capacity: about 2.1L

9. Test environment: (23 ± 2) ℃ (per room temperature change should be ≤ 1 ℃) Relative humidity (40-60)% RH

Accessories parameters:

Другие товары поставщика

	Thermal Insulation Material Bond Strength Tester	Meet the standard: JGJ144-2004 "External Wall insulation engineering Technical Regulations" JG158-2004 "Rubber powder polystyrene particles exter...
	Fireproof coatings tester	Sample making: 1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75...
	Building Material Smoke Density Tester	Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materia...
	Building Materials Combustibility Test Chamber	Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies ...
	Steel Structure Fireproof Coatings	Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel structure fire retardant coatings is a special instrume...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...