Initial drying resistance tester

• 

Introduction：

The Initial Drying Resistance Test Machine is a crucial instrument in the evaluation of architectural coatings and building putties, primarily employed to assess their resistance to cracking during the critical initial drying phase. This testing is paramount in ensuring the aesthetic appeal and long-term performance of applied materials, especially those intended for exterior use, where they are constantly subjected to varying environmental conditions.

The core function of the machine involves subjecting a prepared sample of the coating or putty to controlled wind speed conditions within a specially designed wind tunnel. This simulation mimics the natural drying process that occurs on-site, but under accelerated and standardized conditions. The setup typically includes an axial fan to generate the airflow, a test wind tunnel to channel the air, a sample rack to hold the test specimens parallel to the airflow, and an air volume control device to precisely regulate the wind speed. Instruments such as a timer and anemometer are also integrated to monitor the duration of the test and the velocity of the air, respectively.

Technical parameters:

1. axial fan, can be stepless speed regulation

2.Test the wind tunnel

3. test plate frame and air volume adjustment device

4.Timer

5. anemometer, wind speed control :3 0.3m/s

6. working voltage :AC220-240V, power 0.3KW

7. working temperature :23士2°C

Другие товары поставщика

	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
	Battery impact tester	The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position over the center of the ...
	Contact heat resistance tester	Product Details The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time r...
	Carpet Dynamic Load Tester	Compliance Standards ISO 2094: 1999 (BS) QB/T 1091-2001 ASTM D3574 TEST I4 Instrument Features Provide information on the reduction in the thi...
	Fiber Crimp Elasticity Tester	Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...