Atomised ferrosilicon 15%
Atomised ferrosilicon 15% is manufactured by melting fesi 75% ferrosilicon with premium scrap steel in an induction furnace. The melt is then blown into small particles by high pressure water jetting system. It is then dried and sieved into different grades and packaged as per customer’s request.
Atomised fesi has the following properties:
(a) resistance to abrasion,
(b) resistance to corrosion,
(c) high specific gravity,
(d) magnetism, which allows easy magnetic recovery with subsequent easy demagnetization
Material Data Sheet
Fe: 80% min, Si: 14-16%, Mn: 0.8% max, Cr: 0.6% max, Cu: 0.5% max,
P: 0.10% max, S: 0.05% max
Particle Size Distribution
Non-Magnestics: 0.5% Max
Density: 6.7-7.1
Packing: 1mt, 2mt, or iron drums as per request
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rare Earth Ferro Silicon | Chemical composition/Size/Packing can be adjusted according to customer’s requirements; |
 |
Si-Ca-Al alloys | Chemical composition/Size/Packing can be adjusted according to customer’s requirements; |
 |
Fused Binary Refining Slag | Fused Binary Refining Slag is one deoxidizer and desulfurizer for special steel |
 |
FeSi 15% (Brown Fused Alumina) | low Si about 15% and Fe > 70%. Our FerroSilicon is widely exported to Southern Africa, Middle East, Australia and many other countries all over ... |
 |
Fused Calcium Silicate | Uniform components, low melting point in slag Minerals, smelting shortened; the appropriate viscosity and flow of Slag can promote deoxidization an... |
