Titanium carbide rods - highly efficient in mechanical processing
The manufacturing process of this round bar is highly stringent, with meticulous control over each stage—from the purity of titanium carbide powder (≥99.5%) to the precise regulation of sintering temperature (approximately 1500 °C)—all of which directly influence the final product performance. The finished material exhibits exceptional dimensional stability, with a coefficient of thermal expansion as low as 6×10⁻⁶/°C across a temperature range of -50 °C to 300 °C. This value is significantly lower than that of conventional metal materials, ensuring dimensional accuracy of precision tools under varying environmental conditions. It is widely employed as wear-resistant inserts in automotive molds, where it demonstrates high resistance to prolonged high-pressure friction, thereby extending mold service life. The round bar is available in customizable lengths ranging from 100 mm to 1000 mm and can undergo secondary machining processes such as precision grinding and wire cutting to produce components with complex geometries. Although the initial cost is higher compared to standard cemented carbide, the overall unit production cost is reduced when accounting for its extended service life and improved processing efficiency. In the gear manufacturing industry, hobs fabricated from this material consistently achieve gear tooth surface accuracy of grade 6 or higher, meeting the requirements of high-performance mechanical transmission systems.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Plasma Sintered Chromium Carbide Powder | Chromium carbide powder is a grey-black powder with a melting point of about 1890°C and a Mohs hardness of 8.5. It has excellent wear resista... |
 |
Compressive strength over 3000MPa titanium carbide rods | titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder ratio... |
 |
Durable hard alloy titanium carbide guide wheel | This type of guide wheel can be customized with groove shapes according to the specifications of the wire or pipe, such as V-shaped, U-shaped, semi... |
 |
Carbide round rods for precision instruments | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。... |
 |
Titanium carbide hard rods - suitable for chemical parts | The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional. When machining sticky materials such ... |
