Nano titanium carbide (TiC) has a high specific surface area
Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperature of alumina ceramics, thus saving energy costs. Compared with other ceramic powders (such as silicon carbide), it has better toughness, with a fracture toughness of up to 6MPa·m¹/², making it suitable for manufacturing structural ceramic parts. The powder can be made into granular form through spray drying, which is convenient for forming and processing. The density of the compact can reach more than 65% of the theoretical density. In the field of wear-resistant valves, ceramic valves made from this powder can withstand the erosion of high-pressure fluids and have a service life 20 times that of steel valves. With the development of the new energy industry, titanium carbide powder is also applied in lithium-ion batteries. When used as an anode material, its theoretical capacity reaches 350mAh/g and its cycle life exceeds 1,000 times. After the surface of the powder is coated with a layer of carbon, its conductivity is further enhanced, and the charging and discharging efficiency of the battery is increased to over 95%. In the field of energy storage, it provides a new direction for the research and development of high-performance batteries and promotes the progress of new energy technologies.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Customised diameter/length round bars available | Titanium carbide alloy round bar is made of titanium carbide as the hard phase and metal powder as the binder phase, which is made by powder meta... |
 |
Metal matrix composite material titanium carbide powder | Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o... |
 |
High-temperature resistant titanium carbide powder | After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi... |
 |
High wear-resistant carbide titanium alloy guide wheel | The guide wheel is equipped with precisely machined installation holes, which can strictly control the fit clearance with the shaft within 0.005- 0... |
 |
Chromium carbide powder for valve sealing surface | Chromium carbide powder is silver grey in colour and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
