Chromium carbide powder that facilitates green surface treatment and the development of new materials
Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon content of ≤0.5%. It features high hardness and excellent wear resistance, with a bulk density of 2.9-3.2g/cm³, and is suitable for thermal spraying and surfacing processes. It is widely used for surface strengthening of easily worn parts such as mine crusher liners and metallurgical roller tracks, effectively resisting material erosion and extending the service life of equipment. Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a composite coating, which features both high wear resistance and self-lubrication, with a friction coefficient as low as 0.05. It is suitable for working conditions without lubrication or where lubrication is difficult. On the surface of the drying cylinder of papermaking machinery, this composite coating can reduce the frictional damage to the paper, prevent the paper from sticking together, and improve production efficiency. The particle size of the powder is uniform, with a particle size distribution deviation of less than 10%, which can ensure the uniformity of the microstructure of the coating and avoid performance defects.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide powder for cemented carbide | The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements... |
 |
Titanium carbide powder that enhances wear resistance by five times | Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o... |
 |
Chemically stable chromium carbide powder | Chromium carbide powder is a grey-black powder with a melting point of about 1890°C and a Mohs hardness of 8.5. It has excellent wear resista... |
 |
Nano titanium carbide (TiC) has a high specific surface area | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Wear-resistant steel-bonded hard alloy round bar | Titanium carbide (TiC)-based cemented carbide round rods exhibit exceptional electrical conductivity, rendering them highly suitable for electrodes... |
