Product Name: High-Temperature Tungsten Mesh | Shielded Tungsten Wire Mesh | Tungsten Wire Braided Mesh Model: W1, HW61, HW91, etc. Mesh Size: 5Mesh-200Mesh Wire Diameter | Thickness: 0.5mm-0.03mm We

Product Name

Model

MO1>99.95% Molybdenum Rhenium Alloy

Density

Melting Point

.

Characteristic

At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions.

2. ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide.

Application

Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.

Contact Information

1. P: