COLD HEADING DIE CORE NUT DIE

• 
• 
• 

The cold headingdie bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required to have high strength, toughness and wear resistance, tungsten carbide with high cobalt content(Most grades applied to the heading die core contains cobalt more than 12%, some even reach up to 25%) can perfectly meet this requirement, so all better heading die with long service time use tungsten carbide as die core material, and the outer case of the die is made of hot working die steel (the hardness after heat treatment is about HRC 45). The core is inserted the outer case by cold pressing or hot pressing method, so as to make the core and case combine tightly, and the outer case causes certain compressive stress to the inner core, which improves the service conditions of the die and extends the service time of the die.

Cold heading die(also mentioned as cold header dies) for fastener industry can be divided into cutting die, forming die, and trimming die as per the different production process of a fastener product, and forming die includes the first station, second station, third station, up to the fifth station for some complicated items. Divided by detailed fastener products, there are bolt die, screw die, nut die, hexagon nuts with flange die, drill point die etc. The carbide grade for flanged hexagon nuts is special, please check with Betalent carbide sales person.

In addition to cold upsetting, there is also a warm heading or hot heading process used in fastener manufacturing, especially for large size or complicated deformation fastener blanks, when cold heading may cause heading defects. Betalent has a series of carbide grades for warm heading, hot heading and hot forging, below is the list:

For more grades please contact sales person.

Tips for heading die carbide grade selection:

3. If you want to improve your heading die further or want to change to a better supplier, it is very important to describe the current problem of the current die to Betalent salesperson, and if possible take show the picture of the broken point detail of the die, sometimes a problem may be caused by too hard grade, sometimes too soft, sometimes special formula grades may be needed, you can turn to Betalent carbide’s professional engineer team for a solution.

As one of the most professional carbide tool manufacturers, Xiamen Betalent Carbide Co., Ltd provides carbide product, heading forging, cold headed parts, carbide cutting tools, tungsten carbide rods for sale, etc. Contact us to know more.

Другие товары поставщика

	WEAR PARTS	Carbide wear resistant partsare made of tungsten carbide and cobalt alloy. Tungsten carbide has superior properties, good wear resistance, and high...
	TUBE DRAWING DIE BLANK	Betalent carbide offers carbide grades special for tube drawing dieand inner plug, all tube drawing dies, and plugs are customized according to dr...
	TWIST DRILL BIT	Betalent twist drill bits are manufactured by Walter 5-axil grinding machine base on submicron grain size tungsten carbide rods, which enable the e...
	PRECISION SHAFT	Customized tungsten steel shaft is more targeted. For example, tungsten carbide precision shaft for liquid discharge control machine, carbide shaft...
	PILOT DRILL BIT	Xiamen Betalent Carbide Co., Ltd is a professional carbide products inc, focusing on designing, producing, and selling cemented carbide materials a...

Похожие товары

	4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL	Продавец: Xiamen Talent Carbide Co.,Ltd	4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL ...
	3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM	Продавец: Xiamen Talent Carbide Co.,Ltd	3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cut...
	2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	Продавец: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDEMILLINGCUTTERS Grain size ...
	2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER	Продавец: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18...
	2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	Продавец: Xiamen Talent Carbide Co.,Ltd	2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutti...