PARTING AND GROOVING INSERT
Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter withdrawal groove, and the end face groove.
The groove shape includes the narrow, wide, and forming groove. There are deep grooving tools, including 1 mm grooving insert, radius grooving insert, etc.. The process features of these inserts are as follows:
1)There are one main cutting edge and two auxiliary cutting edges involved in three-dimensional cutting at the same time. The feed is small, cutting thickness is thin, the unit cutting force is increased, total cutting force and power consumption are large, the cutting heat is high, heat dissipation is poor, and the cutting temperature is high.
2)The cutting speed changes constantly in the process of machining, especially when parting, the cutting speed changes from maximum to zero.
3)As the workpiece rotates, the cutter cuts in continuously. In fact, the Archimedes spiral surface is formed on the workpiece surface. As a result, the actual front angle and back angle are constantly changing, making the process more complicated.
4)Due to the narrow width of the tool, relative hanging elongation, poor rigidity of the tool, easy to vibrate.
Betalent carbide insert parting toolare designed and manufactured considered above factors and are belong to high-level quality. The standard stock mainly includes the following three categories.
Model code |
S |
R |
La |
MGMN200-M |
2 |
2 |
|
MGMN250-M |
17 |
||
MGMN300-M |
3 |
17 |
|
MGMN400-M |
4 |
22 |
|
MGMN500-M |
5 |
22 |
|
MGMN600-M |
6 |
22 |
Model code |
S |
R |
La |
MRMN250-M |
17 |
||
MRMN300-M |
3 |
17 |
|
MRMN400-M |
40 |
2 |
21 |
MRMN500-M |
5 |
20 |
|
MRMN600-M |
6 |
3 |
19 |
Xiamen Betalent Carbide Co., Ltd is one of theprofessional carbide suppliers, focusing on designing, producing, and selling cemented carbide materials and carbide product.Betalent carbide factory has advanced facilities and inspection instruments, offers carbide products to the middle to the high-end market.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
ROUGHING END MILL | ROUGHING END MILL There are four carbide grades applied to general flat end mills: BT45, for milling materials of which hardness range from HRC4... | |
TUBE DRAWING DIE BLANK | Betalent carbide offers carbide grades special for tube drawing dieand inner plug, all tube drawing dies, and plugs are customized according to dr... | |
COOLANT DRILL BITS | Betalent carbide COOLANT DRILL BITSapplication and advantages: through coolant drill bits, effectively reduce the chipping and maintain good wear... | |
CARBIDE ROD | Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.... | |
CENTER DRILL BIT | Center finderdrill bitis a common tool in machining, which plays an important role in actual production. The first application of center drill was ... |
Похожие товары
Прямая труба из хромоникелевого сплава центробежного литья | Продавец: Нанкин Xinshuo Механическое оборудование Лтд | Прямая труба из хромоникелевого сплава центробежного литьяДля получения дополнительной техническо... | |
White Iron Wear Blocks, Wear Bars | Продавец: Yiwu WALKSON Machinery Equipment Co., Ltd. | The unique, formable designed wear bars is available in various lengths, grades and sizes and can... | |
TITANIUM ALLOY STEEL TUBE | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | TITANIUM ALLOY STEEL TUBE Titanium is the ninth most abundant element in the earth's crust and t... | |
STEEL FITTING | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STEEL FITTING Steel has been used for making pipe and pipe fittings for years for its durability... | |
STAINLESS STEEL PIPE/TUBE | Продавец: YUHONG GROUP CO., LIMITED ZHEJIANG YUHONGWELL STEEL CO., LIMITED | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufactur... |