.

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

steel shot 1mm


1.Steel shot picture

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand


Steel Shot is manufactured by melting selected scrap in electric induction furnace.

The chemical composition of molten metal is analyzed and strictly controlled by spectrometer to obtain SAE Standard specification.

The molten metal is atomized and transformed into round particle and subsequently quenched and tempered in a heat treating process to obtain a product of uniform hardness and microstructure, screened by size according to SAE Standard specification.



2. SteelShotSpecification

Project National Standards Quality
Chemical composition% C 0.85-1.20 0.85-1.0
Cr 0.26% 0.26%
Si 0.40-1.20 0.70-1.0
Mn 0.60-1.20 0.75-1.0
S <0.05 <0.030
P <0.05 <0.030
Hardness steel shot HRC40-50
HRC55-62
HRC44-48
HRC58-62
Density steel shot ≥7.20 g/cm3 7.4g/cm3
Microstructure Tempered Martensite or Troostite Tempered Martensite Bainite Composite organization



3. SteelShotProductionProcedure

1 Smelting(steelscrap+alloy)

2Forming

3Drying

4Screening(separatetheSAEshotsizefromtheoversizedshotparticlesusedforgritproduction)

5Selection(removeirregularshapedshot)

6Quenching(producesuperiorparticleintegritywithminimalstresscracks)

7Tempering

8Screening

9Packaging(25KGSperonesmallppbag)
Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand



4. SteelShotApplications

shot blasting

Fettling

cleaning the casting sand and burnt -on sand of the casting to make the surface get good cleanliness and required roughness, so that can be benefit to the subsequent processing and coating.

Steel plate surface preparation

Cleaning the oxide skin, rust and other impurity by shot Blasting, then using the vacuum cleaner or the purified compressed to clean up the steel products surface.

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

5. SteelShotCertificate

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

6. SteelShotNormalPacking

1). 25kg (55lb) per bag,then 40 bags put in a 1000kg (2200lb) bulk bag.

2). 25kg (55lb) per bag,then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.

3). 1000kg (2200lb) loose in one ton bulk bag.


Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

7. FAQ

Q:Whatpaymenttermsdoyousupport?

T/T:50%advancepayment,thenpleasepayustherest50%paymentwhengetthescannedB/LviaE-mail

L/C:100%irrevocableL/Catsight.

Q:What'stheMOQ.ofyourproducts?

OurMOQ.5ton.Orasyourrequirements,wecalculatethenewpriceforyou.

Q:Canyouprovidefreesamples?

Yes,wecansendfreesampleslessthan500gtoyou.

Q:Whatstandardsareyoucarryingoutforyourproducts?

SAEstandard,ISO9001,SGS

Q:Canyoupackthecargoasourrequirements?

Yes,wecanpacktheproductsasrequest.


8. Main products

We are the manufacturerof abrasive mediafor more than 13 years experience in China.

Abrasives media we manufacture:

Steel grit

Steel shot

Glass beads

Garnet

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand




9.Team and customers

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

Ifyou need more details, pleasecontact withus any time

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand


Отправить запрос, связаться с поставщиком

Кому: Honest Horse China Holding Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

garnet sand 30/60 mesh for sandblasting
garnet sand 30/60 mesh for sandblasting garnet sand blasting 30/60 Garnet Sand Picture Garnet Sand Specification Product Garnet Sand Specific Weight 4.1g/c...
Filter Media/Abrasive Powder/Manufacturer Rock garnet sand 20-40#for Water Filtration
Filter Media/Abrasive Powder/Manufacturer Rock garnet sand 20-40#for Water Filtration garnet sand 20-40# Picture of garnet sand Product description It goes through crushing,magnetic separation,washing and drying produ...
low consumption abrasive garnet sand water jet cutting abrasive garnet sand
low consumption abrasive garnet sand water jet cutting abrasive garnet sand steel shot SteelShot Pictures SteelShot Specification Items Steel Shot ChemicalComposition C 0.85-1.0 ...
low consumption abrasive garnet sand water jet cutting abrasive garnet sand
low consumption abrasive garnet sand water jet cutting abrasive garnet sand Garnet sand 80# Garnet Sand Introduction Ourgarnetsandis rocktypegarnetminedfr...
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive steel shot SteelShot Pictures SteelShot Specification Items Steel Shot ChemicalComposition C 0.85-1.0 ...
Все товары поставщика

Похожие товары

Rotary Magnetic Hooks
Rotary Magnetic Hooks Продавец: NingBo BeiLun Meank Magnetics Co., Ltd Model L D D1 D2 D3 H h Weight (g) Magnetic ...
ROYAL COLOR-SZ Quartz Countertops
ROYAL COLOR-SZ Quartz Countertops Продавец: XINYUN STONE (YUNFU) CO., LTD Upgrade your kitchen or bathroom with the luxurious and durable Royal Quartz Countertopsfrom Xiny...
High Purity Silica Sand
High Purity Silica Sand Продавец: Hebei Chida Manufacture and Trade Co., Ltd High Purity Silica Sand Product Description Applying specific quartz mine, High Purity Silica S...
Mica Powder
Mica Powder Продавец: Hebei Chida Manufacture and Trade Co., Ltd Mica Powder Product Description Mica is a layered silicate with good elasticity, toughness, ins...
ReSiC flame tubes, SiC burners nozzles, ReSiC burner cone
ReSiC flame tubes, SiC burners nozzles, ReSiC burner cone Продавец: Карбидокремниевая техническая керамика Характеристики крышки горелки из рекристаллизованного карбида кремния: Рабочая температура 1700 ℃...