Gravel Resistant Impact Tester

Производитель: Standard International Group (HK) Limited

Все товары поставщика

Standards

Product Advantages

Precision Impact Simulation: Replicates real-world gravel impact scenarios (e.g., road debris, aviation particle strikes) with adjustable speed and angle controls.
Multi-Industry Applicability: Essential for automotive body panels, aircraft skins, train coatings, and architectural finishes.
High-Speed Airflow System: Generates consistent particle velocities (20–120 m/s) for repeatable testing across samples.
Modular Design: Interchangeable nozzles and sample fixtures accommodate diverse component geometries (e.g., curved automotive panels, flat building materials).
Advanced Safety Features: Enclosed testing chamber with integrated debris shield and emergency stop function.
Data-Driven Analysis: High-resolution camera system captures pre/post-test images for quantitative damage assessment (dents, cracks, delamination).

Product Features

Airflow Control System: Digital regulation of air pressure (0.2–0.8 MPa) and particle velocity for standardized testing.
Adjustable Impact Angle: 0–90° tilt mechanism to simulate horizontal, vertical, or oblique impact angles.
Sample Fixtures: Universal clamps for securing automotive panels, aerospace composites, or building materials up to 500×500 mm.
Touchscreen Interface: Programmable test cycles, air pressure, and impact angles with real-time data logging.
Debris Recycling System: Integrated funnel and vacuum system for automated gravel collection and reuse.
Safety Interlocks: Transparent enclosure with light curtains to halt operation during access attempts.

Technical Parameters

Parameter	Specification
Impact Angle	0–90° adjustable (1° increments)
Particle Velocity	20–120 m/s (adjustable)
Sample Dimensions	Up to 500 × 500 mm
Gravel Size	3–16 mm (customizable)
Air Pressure Range	0.2–0.8 MPa (29–116 psi)
Control System	PLC with 7-inch touchscreen (100 test memory)
Power Supply	220V/50Hz, 500W
Dimensions	800 (L) × 700 (W) × 1,200 (H) mm
Net Weight	150 kg
Safety Rating	CE/ISO 12100 compliant

Отправить запрос, связаться с поставщиком

	SO2 H2S HCL Corrosion Test Equipment	Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89. GB2423.9 - 93. GJB150. QC/T417.1 - 2001 a...
	Car seat belt locking performance tester	Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea...
	Aircraft wire wear testing machine	Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ra...
	Fireproof coatings tester chamber method	Standards GB 14907—1994、GB 14907—2002、ETAG：2006、BS 8202:1992:2 Sample making 1. The test plate of the fireproof coating tester (smal...
	Gas engine filter tester	Product Introduction: The gas engine filter is an efficient filtration equipment used to filter and exclude impurities in the medium in the pipeli...

Seat Bumping and Creep Test Bench	Продавец: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
Automobile seat belt fixed point test bench	Продавец: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
Impact strength tester for car seat headrest	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
Impact strength tester for car seat launching headrest	Продавец: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
Automobile Headrest Strength Tester	Продавец: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...