PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.
PA66 GF15 Storage and Handling
PRE-PROCESSING：
Pre-drying: 4-6h / 130°C
Processing:
Melting temperature 280 - 300 °C
Mold temperature 60 - 100 °C
Product storage and handling:
PA is a highly hygroscopic material. When the dryPA materialis exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.
PAGF15Heat Stabilized (A2006C) Typical Application
PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering plastic and the color masterbatchwas founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Masterbatch | We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty... |
 |
PA66 GF20 With High Tensile Strength (A2307D, A2317D) for Engineering Plastics | Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF 20, it shows high oil resistance, high impact resistance, good resistance to lo... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmeifocuses on the production of modified engineering plastics. We have polyamide PA66 modified products with propertiesof heat-resistant, rein... |
 |
PA6 GF in Anmei | As anengineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineerin... |
 |
PA66 GF30 (A2000F, A2011F, A2111F) | PA6630GFis a polyamide 66 reinforced with 30% glass fibers. It demonstrates outstanding mechanical properties such as high fluidity, high toughness... |
