Plastic Spoon Mould
lastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, we have to choose proper plastic materials, such as food grade PP,PS,PE etc.,we always stand in the customer's perspective to design and making high quality molds, to help our customers to save their time and money, so for the plastic spoon, we choose multi-cavity design and arranged the cavities to be a circle, the construction is good for high speed production and saving the mold and molding cost.
High-quality Plastic Spoon Mould
As the mold life needs to be more than 500,000 shots, so we choose the mold steel H13 and Yudo hot runner, and multi-cavity design, during the production, our products are produced in strict accordance with the ISO9001:2015 international quality system, from ordering the materials to final finish, our engineering and QA department inspect and reporting each processing day by day, to make sure the molds according to the design, and we also would send detailed progress reports to our customers each week to let them know how the molds/parts are produced, after finished the production, we will do the mold trial and check the samples, including dimensions, appearance, and construction, we will make sure the parts are with good finish and right dimensions.
Basic Information For Plastic Spoon Mold
Points of making plastic spoon mould
Designing the mold with multi-cavity and good cooling system to save the cost and ensure the good quality.
The spoons should with a good finish, so the right construction of the mold and high quality should be ensured.
The materials of the spoons should be safe for hot food and meet environmental concerns.
To enhance production efficiency and save cost, the mold should be with a good cooling system and reasonable construction.
Using robots to pick up the parts during production can also enhance production efficiency.
Following our construction to install and use the mold, to make sure there's no any damage for the mold and less repair.
As a reliable injection molding supplier, we can offer sorts of injection parts for sale, anything you need, please leave us a message.
Другие товары поставщика
|
|
Auto Rear View Mirror Housing Mold |
Auto Rear View Mirror HousingMold
The car rearview mirror is an important part of car exterior parts, located on both sides of the car, is one o... |
|
|
Auto Part Mold |
Auto Part Mold
With the vigorous development of the automotive industry, plastic auto part moldis also developing rapidly. 90% of auto parts are p... |
|
|
Plastic Toilet Seat Mold |
Toilet seat casting moldquality points: cover mold cycle, cover mold life, Parting line whether there are sharp edges? Is the cover wall thickness ... |
|
|
Plastic Spoon Mould |
Plastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, ... |
|
|
Filter and Flow Limiting Apparatus |
The family mold is used to produce injection parts for liquid filtration and flow monitoring and control systems.
These accessories are custom... |
Все товары поставщика
Похожие товары
