Silicone Rubber for Cement Casting
DESCRIPTION OF SILICONE RUBBER FOR CEMENT CASTING:
It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing agent/catalyst ,which gets cured at room temperature 25℃ within 3-6 hours or heating curing.This product is perfect for cement,concrete stone, GRC and GFRC products’ mold making,such as the flower pot,fountain,Polyurethane Wood Imitation,Reinforced Plastic,Garden Decorations,fiberglass product and other decoration industries.
FEATURES OF SILICONE RUBBER FOR CEMENT CASTING:
1.High duplication times and no deformation
2.Excellent tear strength and tensile strength.
3.Good fluidity and good operability and good for both pouring method and pouring method.
4.Excellent flexibility and it is easy to demould.
5.It gets cured at room temperature 25℃ within 3-6 hours.
6.Suitable hardness from 30 to 40 Shore A
OPERATION OF SILICONE RUBBER FOR CEMENT CASTING:
Step 1:Prepare the original mold
Weigh silicone&curing agent according to the mix ratio recommended,than remember to stir silicone & curing agent evenly,otherwise the silicon rubber will be partly solidified and bring problems in your final operation. Whats more, the finished molds will meet a short life.
Step 2:Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 3:Pouring casting or Brush operation
Step 4:After 3-5 hours later,demoulding the silicone mold,It will be better to use the mould after 24 hours.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Другие товары поставщика
|
Liquid silicone rubber material for kitchenware,High temperature resistance Silicone Rubber,Low Shrinkage Silicone Rubber |
PRODUCT DESCRIPTION:The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes.KEY FEATURES:1. H... |
|
Candles Mold making Silicone Rubber,Low Shrinkage Silicone Rubber,Crafts Mold Making Silicone Rubber |
FEATURES OF CANDLES MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resista... |
|
Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber |
PRODUCT DESCRIPTION:This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.KEY FEATUR... |
|
Electronic Potting Compound Silicone, |
Product DescriptionThe product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, good adhesion streng... |
|
Silicone rubber for cell phone keypad products |
PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding... |
Все товары поставщика
Похожие товары