Filter Media Tester HMT 1000

• 

Heatable modular test system for oil mist separators in accordance with ISO 20654 Quality assurance and the development of filters/separators/traps should preferably be performed under test conditions that are relevant to the actual conditions encountered in practice.For this reason, oil separators must be tested at high temperatures of up to 120°C and, depending on the type of application, at high pressures.
With the modular test system HMT 1000, oil separators (e.g. for the separation of blow-by aerosols in internal combustion engines or for the separation of oil mist downstream of compressors) are quickly and accurately characterized and, in particular, successfully tested underpractically relevant conditions through isothermal particle measurements up to 120°C:
Fraction separation efficiency
Burden / hold time
Total separation efficiency / gravimetric analysis
Pressure loss
Thanks to the modular layout, the individual components of the test rig, such as the high-resolution heatable light scattering spectrometer Promo®1000 H, the heatable dilution systems KHG 10 D and the heatable aerosol generator PLG 2100, can be simply removed from the HMT 1000 and used for other applications, e.g. measurements directly on the engine.
For many years, numerous companies all around the world have profited from the advantages of the heatable and pressure-resistant Palas®test components for isothermal and isobaric particle size and particle quantity measurements on oil mists.
Palas®HMT 1000 filter test rigs have been used internationally with great success in industry since 2001.
The heart of theHMT 1000is thelight scattering spectrometer Promo®1000 H,which measures the particle size and the number of particles (and therefore the concentration) independently of each other but at the same time. With the aid of the Promo®1000 H it is possible to perform very quick,clear, reproducible andisothermalmeasurements.

Decriptions
Advantages of optical particle measurements over purely gravimetric measurements:
Conventional quantitative gravimetric determinations are often not quick or sensitive enough and provide no information about the particle size distribution. Thanks to the excellent correlation between the quantitative distribution measurement and the gravimetric analysis, very fast and volume-relevant testing of the oil separators is assured. The determination of the clean gas concentration can be performed within 1 minute using the Promo®1000 H system.
Why use isothermal measurements?
The viscosity of the oil – and therefore the particle sizes and particle concentrations in the oil mist – varies as a function of the engine temperature. For this reason, oil separators must be tested at different temperatures, i.e. with different particle sizes (up to approx. 5-8 µm) and particle concentrations (approx. 105to 107particles/cm3) as well as different volume flows, in order to clearly characterize them in terms of their capacity to separate. Changes to the separation properties of the separator, e.g. due to the change in volume flow, temperature, filter burden etc. must be clearly determined through a reliableonline measurementorin-situ measurement. In order to avoid not only condensation effects, but also evaporative effects, on theHMT 1000the entire aerosol guide, including the preparation, sampling and measurement volume, can be heated to 120°C. As a result, measurements of theisothermal fraction separation efficiencycan be performed.Isothermal in-situ measurement, e.g. on the engine
The HMT 1000 test system is mobile and has a modular layout. As a result, the individual components can also be used for other tests and particle measurements, e.g. in-situ measurements on the engine.

Другие товары поставщика

	Medical Face Mask Particle Protection Filtering Efficiency Tester Machine	The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's ...
	Velcro Fatigue Tester for hook and loop fasteners	Velcro Fatigue Tester for opening and closing the hook and loop fasteners is designed for opening and closing the hook and loop fasteners, A hook a...
	Digital Hydraulic bursting strength tester	Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli...
	Precision Double Head Rotary Abrasion Tester with Rotary Platform Dual (Double) Head	DualHeadRotaryAbrasionTesterisadurableprecisionbuiltinstrumentsdesignedtoperformacceleratedweartestsonavarietyofspecimens.ThisAbrasionTestissuitabl...
	Cone calorimetric test equipment	StandardsApplication ISO 5660Reaction to fire tests-Heat release, smoke production and mass loss rate.ASTM E 1354Method of test for heat and smo...

Похожие товары

	Кабинет китайской и западной медицины	Продавец: Shanghai Hongbiao Equipment Co.,Ltd	Chinese and Western medicine cabinet, stainless steel cabinet, medicinal materials cabinet, medic...
	Шкаф для лекарств Шкаф для лекарств	Продавец: Shanghai Hongbiao Equipment Co.,Ltd	Medicine cabinet, medicine cabinet, convenient medicine box, outdoor medicine cabinet, hospital c...
	Медицинская прикроватная тумба	Продавец: Shanghai Hongbiao Equipment Co.,Ltd	Medical bedside table, medical abs bedside table, ward bedside table, hospital cabinets, medical ...
	Шкафчик для врача из нержавеющей стали	Продавец: Shanghai Hongbiao Equipment Co.,Ltd	Doctor locker, medical locker, hospital cabinets, hospital furniture, stainless steel locker, sto...
	Медицинский стерильный шкаф	Продавец: Shanghai Hongbiao Equipment Co.,Ltd	Medical sterile cabinet,medical equipment disinfection cabinet,sterilization cabinet,ultraviolet ...