Carpet appearance tester
Description:
Thiscarpet appearance testeris suitable for testing the changes of surface structure and color of all carpet products requiring appearance evaluation under the action of hexapod mechanical mode.
Principle:
The carpet sample is affixed to the inner wall of the roller, and a hexapod test block is placed to make the roller rotate, and the hexapod rolls on the surface of the sample. After a certain number of times, the changes in the structure and color of the surface of the carpet are evaluated.
Test Method of Hexapod Tumbler Tester:
Specimens of carpet are fastened to a flexible backing sheet with double-sided adhesive tape. This assembly is fitted on the inside surface of the drum and can easily be removed at any stage for inspection of the specimens under test. If required, an underlay may be fitted beneath the carpet for direct comparison with normal use.
The drive to the drum incorporates a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet.
The carpet specimens are treated for 2,000 revolutions, which takes approximately one hour. They are then taken out of the drum on their backing sheet and cleaned using an upright vacuum cleaner simulating practical usage.
The specimens are replaced and the treatment repeated, normally six times, giving a total of 12,000 revolutions. After the final vacuum cleaning, the change in appearance is assessed against an appropriate set of ISO reference scales.
Standards ofHexapod Tumbler Tester:
BS EN 1471: 1997，ISO 9405: 2001
IWS test methods 247 & 251，ISO 10361: 2000 (BS)
Wools of New Zealand test methods 247 & 251
Другие товары поставщика
|
|
Floor Caster Wear Tester |
Meet the standard:
GB/T 11982.2,
GB/T 4085,
BS/EN 425,
ISO 4918-2009
ASTM D6962
BS EN 425-2002
BS EN 985-2001
ISO 10581-2011
ANSI-NALFA-LF... |
|
|
Protective Clothing Synthetic Blood Penetration Resistance Tester |
Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressu... |
|
|
Metal Bone Screws Torque Tester |
Standard
YY/T 1506, ASTM F543:
The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
|
|
Car seat component clearance test bench |
Applicable standards:
Car seat component clearance test benches usually follow the following domestic and international standards:
QC/T 805-2008 ... |
|
|
Metal Corrosivity Tester |
standards
GB/T 15970
ISO 7539
ASTM G31
GB/T 10125
Scope of Application
The metal corrosivity tester is designed and manufactured in line with... |
Все товары поставщика
Похожие товары
